Processing: tip is also good in the hand, looks and feels there is nothing to Mäckern
The accessories: Yes, nice little bonus, but will not survive long. This can be provided with high-quality drill bits and bits but gradually. For me one more here uws the already beautiful in the luggage compartments. are present which can then equip according to his wishes. For but what you need 3 times per 25 bits in the same sizes opens up not quite (can vll. To draw conclusions about the quality).
Now for the downside: I have on my device a slight eierndes chuck (uneven running). On a request from DeWalt on the very courteous dealer FRONT TOOL I got the following response:
>> There may be a
>> Come deception by the outer jacket of the drill chuck, this runs
>> Non-circular part, but has by no means a qualitative impact
>> To the concentricity of the drill chuck.
The problem here is that it is clearly the chuck, not the shell. When drilling you realize the imbalance and to the bit you can see this also. Slightly disappointed that DeWalt had me not even want to watch the unit and had just sent me only this standard response. Now I held 2 more machines of the same type in the hands and allowed to try out, I realized that the other machine had an even worse imbalance. Either I had extremely bad luck or really exists some need for improvement.
After careful consideration I have nevertheless opted for the unit because I am absolutely convinced of the rest of the device. If I really need precise holes I take anyway a normal drill or my drill press. With Torx screws which I mainly insets it is. Garkein problem and also with PZ screws I could find no restrictions by the non-circular chuck
Three things I would like to highlight:
1. The service of FRONT TOOL: Really a recommended dealer. Any inquiries in this regard were answered well and it was set immediately with DeWalt connected. Something like you find today unfortunately not too often.
2. I have nothing to do with FRONT TOOL, not a get the wrong idea. The service has just convinced me.
3. The cordless screwdriver is not bad, so even 4 stars. If the chuck properly in concentricity I would give 5 stars. Power has the thing about it you need not to worry and with the Li-ion battery and its brushless motor should also be given the longevity. The case is absolute peak and still has room for further accessories.
I have him now only a week. Once I had him longer in use I will again add a review here.
UPDATE: 11/18/2014
Today (Comment this recession s.) My comparison unit has arrived: DeWalt DCD790D2
In principle, the same machine without percussion. This is significantly better in the concentricity! I can not judge whether I have just now caught by chance a device that a "better" chuck has or whether this model allgmeien less eggs available now. I will stay at least for the DeWalt cordless hammer set BL, 18 V, 2 Ah, DCD795D2KX-QW because me the runout is more important than the impact mechanism.
If anyone still needed info's can sign up happy.