With a time SUBSCRIPTION this radio came into our kitchen. As already read elsewhere: extremely poor reception! Solution: Radio from the power! Then grope with a conventional Prüfschraubenzieher in one of the four corner holes of the back cover. In 5 cm depth, loosen the screw located there. Repeat at the other corners. Remove lid - Caution Radio Front is now loose. On the backside cables are attached, man does not need to solve. There is a spring that looks as if it had been pulled apart at this inside. At the top of a cable is soldered. This is the antenna. At this spring an insulated copper cable attach and pass through the existing unused hole in the rear Radio lid above. Close tightly again. Cable lead as long as possible through the room. Plug in, Radio at: .... it funzt!