2 - Use: average marks below 2.75 / 10
2.1 - number of sheets: 1/10
One can certainly put 12 max provided that the edge of a sheet is not bent slightly otherwise it will not pass.
When one is on the handle to punch with this thickness, I thought the plastic handle to give the strength it took to listen to perforate the paper. So the half, it goes better
Hopefully you have a well-connected file because it was beautiful to watch, this lack of HID that once perforated, if the page has not been well established, it is the sheet that can be connected ... so the point?
2.2 - Installation of pages punch: 3/10
At no time, no mark, we can not know if the sheet is engaged correctly without even being slightly askew ...
So we try to surprise punch in a vacuum, or puncture so close to the edge, it's not even worth installing the pudding, because it is so fragile that it rocks very quickly
2.3 - Perforation: 4/10
the holes are made at 2.8 mm from the edge, against 6 mm on a traditional desktop machine and price.
What impact? inevitably, the handling strength of these sheets is less, because the distance is too close to the binding rings of sausage, some manipulation and this kind of record not end up tearing .... very very quickly
2.4 - the rear tray: 3/10
He used to receive pieces of paper corresponding to the perforation. Surprise, made it out, because that drawer is so resistant to opening with an outlet that is not easy, you will be surprised he finally gave in and you have a full desktop confetti.
3 - documentation, indication 5/10 (an average of function and ease of use)
A sticker gives the diameter of the flanges to buy based on the number of leaves. color marker is used to measure the thickness, but the difficulty is to stand up without back support, leaves that will bend ... A useful aid, provided that the portion where the sheets are based on the wafer to measure the thickness of the latter, is flat, and high for the leaves waiting quietly without bending the measurement is complete. So useful, but difficult to achieve. It is better to count the number of leaves and from known standards, choose coil binding.
A succinct, pictorial documentation is sufficient to learn how to use this machine
4 - price / quality ratio: no ... 2/10
Overall Average Rating: 4.7 / 10
do not buy, you will have tantrums. This is a VERY BAD EQUIPMENT, and it is better to buy more expensive because see part of his work to repeat because the perforations are very poorly made, or worse, having to conventional holes because the binding is no longer possible with signed and dated, that we can not repeat or redo .... It's infuriating.
So: RECOMMENDED TO PURCHASE;
