The Teaching the LEDs is quickly made:
1. Lamp Switch and select the zone to be assigned within 2-3 seconds on the remote control.
2. The lamp will blink a few times and that's it.
For remote control:
The remote control has no buttons but reacts to touch.
On the one hand very pleasant but also has the disadvantage that it may lead to incorrect operation.
It's happened to me a few times that a lamp has shone, which I had not consciously turned on.
When operating on the APP to me is that does not happen.
App milight:
I've been using the app on an iPad and an iPhone running iOS 7:04
The establishment of milight controller was very simple.
1. Controller power supply (not USB power adapter included)
2. Select the controller on the IOS device under Settings / WLAN and connect.
3. The APP milight start (note: the AppStore discoverable only iPhone apps)
4. The app scans for WiFi networks. (Warning only 2.4GHz networks until incl. Channel 11 found)
5. Select the own WLAN and enter the password.
6. Now connect the controller to the network.
7. Confirm connection with OK, the controller restarts and is ready for use.
8. Now only teach the LEDs. (Procedure identical to the hardware remote control)
In the APP, the 4 zones can benennen.Sehr beautiful.
1 copy of remote control hardware: Otherwise, the app is not available in a 1.
The color changing programs can be only by select and change in the speed, but not save.
Here I would like to see the selection of programs, a pop-up menu with storage possibility.
So the desired color change program would be selected directly.
Could this create still own programs it would be perfect.
In my opinion, these options would enhance the color change programs enormously.
