As per you can call the following:
- Easy to set up (feet off and screw in)
- Easy to use. if one knows how much it then needs only one side, both sides, or only one level (blablabla, are thousands of possible combinations)
- Space-saving, yet quick-drying (depending also fully dries everything faster, more on this below)
- Platzsprend also collapsed
Cons:
- The aluminum frame is without underwear like jelly, of course, in the structure
- Must hinundherschieben and should be avoided (full and empty)
- The cross braces are attached only in plastic and correspondingly susceptible to breakage
When one of the stand the Contras is respected properly. Even our daughter depends on the things with (stupid: although they einpullert times, it depends happy times with these things go there)
We had the problem that was broken at the plastic bracket already at delivery the lower strut. There Hies then try or Exchange?
We tried it and he does his services 100%.
Variety of combinations there are too Hauf:
Only pants - No Problem
Only T-Shirts - No Problem
Only socks - No Problem
Shirts on coat hooks - No Problem
All together - No Problem
On the topic Quick-drying:
Wing drying rack: Here the stuff in the middle is hung crosswise, then if still the pages are used, then the things of long ago arrive there it, this looks completely finished from the top and thus naturally accumulates air and moisture in the central region.
In the Metaltex it looks like
---------------
---------------
---------------
---------------
=============== <-Querstreben In the middle
---------------
---------------
---------------
---------------
Flawless circulation also fully packed, because the right and left nothing in front of it, even if the shirts on coat hooks hang out with off the still runs perfectly.