The device (as repeater) was very easy.
I had the good fortune to be found there even a German instructions, but the few steps that you have to do is to turn it into a repeater you virtually without instructions.
About the cable connection to the PC (the Ethernet port directly to the repeater dranklemmen) produce, take the one described in the manual IP configuration, and then call an IP address and enter the default password. (Whoever guesses the default password? Simple) ...
Then you go right ... I myself have but first stopped the 2-Step Installer and changed the preconfigured default password in a more secure.
After that you had to enter the 2-Step Installer only the access to the existing WLAN. The repeater will immediately recognize that other data it has. The channel presents itself properly etc ... Upon request, you can even take the name of the existing WLANs, or come up with another ...
More was not.
Anyone who wants to configure the router as an access point, must almost take one step ... - enter all information to be made WLANs ... Then, from each network cable is plugged into the router made exactly this wireless ...
From me, there are only 95% .... The picture promises a Euro plug (ie major), but it is only a Euro plug, which in the socket outlet has just not as much grip to really the repeater also to maintain reasonable (at least for the pseudo-effect) ...