The kit ensures that you (etc. receivers, Blu-ray player, PC) can connect wirelessly with a receiving device (projector or television) an output device. It does not matter who the manufacturer is the receiver, it must be fitted with a HDMI and preferably also have a USB port.
Connecting and setting up the kits go actually quite simple and straightforward. There, the transmitter is first connected to the mains and then to the HDMI cable to the output device. Then the receiver to the receiving device on which you want to transfer its image with an HDMI cable is connected. For the power supply of the receiver it is connected via USB to the receiver. If the receiver does not have to have a USB port to power the receiver via plug with electricity. If you then turn on the output device and receiver transmitter and receiver connect in a few seconds and picture and sound are transmitted properly. You can connect the transmitter two output devices and also directly or a receiver. Note should be one that you really makes the power supply to the transmitter via the power cord. If the transmitter using the USB cable supplied from the output device with power, the connection breaks off again.
As an example, short my connection: transmitter was connected to the Sky receiver in the living room TV from the living room was connected to the transmitter. Receiver is connected to the TV in the bedroom. So I can now continue watching the program from my Sky receiver in both the living room and the bedroom. In addition I have already connected the supplied IR repeater cable to the transmitter and thus I can also use the remote control of the Sky receiver switch the program in the master bedroom. This is definitely a great thing.
The first tantalizing reach up to 30 meters is very dependent on the nature of the apartment. From the transmitter to the receiver in the living room to the bedroom, there are with me through a concrete wall 8 meters and there is no problem. In general, I was in my apartment in a range of about 10-12 meters, more then nothing works. When connecting the receiver to my TV in the dining room, which has been removed around the corner through a long corridor about 16 meters from the station, it comes despite the open doors no connection.