I need to send this to splinter quality processed signals to an image processor and projector TV. Since the players and the processor are in a rack and a fast umstöpseln impossible, but from contact wear reason is not wanted, I decided for this speck out of home deleyCon since already made an HDMI cable to me a good quality impression has. I was against the direct connection between image processor and screen notice any really visible differences. In different test images but really a negligible brightness shift was to recognize a micro Nuance down only in a black gradation, while the subjective impression was even minimalist structured. No matter how the fine details or structures go visibly lost. The device has been connected with the supplied AC adapter, it causes no noise or interference while. All chic. The Status LED should light up like half as bright, which is in my home theater no real problem, because the devices are laterally adjacent to the seats, but still a little too much light in the dark. If the device but must be placed in the image area, I recommend the simple LEDs with a black Scotch tape taped off, this can also be removed without trace, if the need arises. A Edding not work ;-)