I earned a piccolino table kettle grill 31375 and built it on according to the assembly instructions. Which reminds me already noticed when mounting the tripod pedestal that the ventilation holes are closed when the three screws are positioned correctly for the attachment of the pedestal. The receipt I got when trying to kettle grill in his capacity to use as kettle grill. The by this time glowing coal went out after I put the lid. Even the fully open ventilation of the lid was not enough to fire ventilation of coal. As well, the air has to be introduced from the bottom to the coal, but that does not go, since the ventilation holes are closed. The central bolt with nut for fixing the leadframe not enough for a firm footing, but so you can wenigsens the vents 'free spin' if the 3 screws are unscrewed again to attach the tripod. I did this by the way, after I umfüllte the glowing coal in a metal bucket and removed the three screws of the tripod. After seeing the three vent holes' free 'had, the coal was loaded again, rekindled and now' only could now- the grilling process to continue successfully. Even the much too small holes in the brazier then disturbed no more. The designers do not seem to grill itself, which otherwise would have noticed what a botch they have constructed there.
Should it be provided by the construction so that there are no ventilation holes, you have also the grid in the middle, can save on the bottom of the grill, as well as the central screw.
So I am working on the assumption that it 'perhaps only in my fall is a production error.
01.08.2012
I have just received a call from a nice lady from compatriot: You send me a new grill as a substitute because you do not know whether or not the foot or the floor was incorrectly drilled with the appropriate holes. Now that is customer service! Exemplary.