DA-70200 Hard Drive Adapter

DA-70200 Hard Drive Adapter

DA-70200 - USB 2.0 Mini Hard Drive Adapter for IDE and SATA (Accessories)

Customer Review

The adapter is really recommendable!
My old computer no longer wanted, so there was only the possibility of throwing it away. Only the hard disks and the data on it have prevented me from throwing the thing in the trash.
So I thought to myself, I buy me something like an adapter.
Did it only with a docking station for trying scarce 20th
The problem with it was that the thing has just taken SATA hard drives.
Although OK, that was my mistake, but if you compare price / performance, it is found that one in the adapter here has a much better product.
Although the docking station for comparison looked much better, but that's it.
It has something cost 17 to 20 and only SATA HDDs accepted.
However, our adapter costs only between 15 and 16 and fits in SATA -> and so incidentally also supports ATA / ATAPI Ultra DMA Mode, PACKET Command feature set and LBA48 bit addressing.
As you can see the description, it runs on Windows (XP, Vista and 7) and on the Mac. Whether it runs on Linux I do not know, but that can be determined on getting up and running.

As you can see is sometimes less really is more (as far as the price here).

On the packaging there is a tutorial for each disk type.
But even without the manual I succeeded right away my IDE hard drive to connect with my netbook and to access the data.
The drivers CD that this was not even I have taken out of the package - everything went without (Windows 7).

It's so easy to connect the adapter that would unravel even a chimp with blindfold!

According to another recession you have in an IDE hard drive (40-pin) only to be careful that you set the plug exactly pins. Namely, it can easily happen that you too far offset all left, leaving only 38 pins are male and 2 not because a little leeway exists.
However, the problem I had not.

Finally, the data were saved and backed up to my netbook and I had everything back what I needed, I formatted my 2 old hard drives and thanks to the adapter to "external" hard drives converted, that I can now use at will.

An article in which the benefit really comes first, without irgenwelchen frills.

That's why 5 of 5 stars. :)

Great for my little works Rank: 4/5
April 16
Meets my expectations. 8 1 Rank: 5/5
March 29
Inspector HIGGINS 1 Rank: 5/5
May 29
Does not work ... 49 Rank: 3/5
September 2
big book full of activities! Rank: 5/5
December 5

Related Reviews


Very good hard drive adapterORICO 6619us3 USB 3.0 HDD Docking Station SATA external of highly durable ABS plastic for 2.5 and 3.5 SATA HDD SATA I / II / III including 1 USB3 cable and 12V 2.5A external power supply support to 4TB komaptibel with Win8 Mac OS X 10.8. 4 backward compatible USB 2.0, 1.0 (Electronic) Hard drive adapter 2.5-inch / 3.5-inch (defective)Hard drive adapter 2.5-inch / 3.5-inch (Personal Computers) Hard drive adapter 2.5-inch / 3.5-inch GenericHard drive adapter 2.5-inch / 3.5-inch (Personal Computers) external hard drive - protection from SiliconDELOCK HDD silicon protector> 8.9cm 3.5 Z (Personal Computers) Installation of a SSD and Reusing the old hard drive in the notebook - with the adapter easily possibleSalcar® HDD / SSD SATA 3.0 drive bay adapter for 12.7mm SATA drive bay (Electronics) Product to another person is not old, still can not support USB 3.0 hard drives are stretched out on the adapterAnker® AH401 4-Port USB 3.0 Hub Super Speed ​​Hub with 1 meter cable adapter to retrieve data from a hard driveDIGITUS USB 2.0 adapter cable SATA / IDE Hard Drives Mini Compatible 2.5 / 3.5 "(Personal Computers) Hard drive clearly audible, battery non-removable, display not very far hinged, otherwise everything superAsus UX32LA-R3073H 33.8 cm (13.3 inches) Ultrabook (Intel Core i5 4200U, 1.6GHz, 8GB RAM, 500GB HDD, Intel HD, Win 8) silver / gray (Personal Computers) Works flawlessly. But does not provide enough power for external hard drives on Raspberry."Of the Raspberry developers recommend" Power Supply Micro USB 5V / 1.2A for Raspberry Pi Model A and B, for global use, TÜV approved with TUV-GS mark! (Electronics) Second hard drive for almost any laptop - good and clean crafted deviceCSL - HDD / SSD drive cage for Notebook | supports SATA III (SATA 3.0) | for SSD / HDD (Serial ATA (SATA) hard drives) | HDD Caddy / upgrade set Bootable (Electronics) Great Hard Drive 1Western Digital Elements external hard drive WDE1UBK10000E 1TB HDD USB2.0 Black (Personal Computers) Housing for hard drivesEasyAcc® SuperSpeed ​​2.5 inch USB 3.0 Hard Drive Case HDD external HDD enclosure with USB 3.0 Cable for 7 and 9.5 mm 2.5 "SATA HDD / SSDs, tool-free installation - Black (Electronics) Good and convenient docking station for 2.5 "and 3.5" hard drives[UASP, SATA3 komaptibel] Inateck FD1005 USB 3.0 HDD docking station for external 2.5 / 3.5 inch SSD HDD SATA I / II / III including USB3.0 cable with 12V 2A power supply (optional) Depending on the hard drive, the device will operate at USB 2.0 ports[SATA 6Gb | USB3.0 | UASP] Inateck FD1006 USB 3.0 HDD docking station for 2.5 3.5 inch SSD HDD SATA I / II / III including USB3.0 cable with 12V 2A power supply support PC / Notebook / Mac (SATA3 support UASP) (Electronics ) Destroyed hard driveLogilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories) Good cover for old IDE hard driveDELOCK HDD silicon protector> 6.4cm 2.5 Z (Personal Computers) Solid hard drive 1Western Digital WD5000LPVX internal 500GB hard disk (6.3 cm (2.5 inches), 5400rpm, 8MB cache, SATA) (Personal Computers) Solid hard drive at a bargain priceWD Elements Desktop External Hard Drive 2TB (8.9 cm (3.5 inches), USB 2.0) (Personal Computers) Raspberry Pi with USB notebook hard driveRydges® High-Quality PC Power Supply - by OTB 2A - / 2000 mAh Charger 5V 2000 mAh for Raspberry Pi Model A and B & Banana Pi - Pi Model B + (B Plus) (Electronics)