In principle of good quality and it looks good, but I'm still disappointed. The ridge on the spout is unprocessed, as fresh sawn: Sharp edge, splinters inside, rough place outside. There with the cloth along immediately got stuck fibers. The I would find acceptable, but unfortunately also leaves the nozzle on the inside of the sprue, a bead, since the hopper is made of two pieces. This leads firstly to the fact that here too stuck fibers from the cloth, and on the other hand, that depending on the strength of the filled liquid does not drain everything. It does not help that the hopper is not continuous straight but at the lower end Stutz rounded tapering to spout.
Perfectly adequate depending on the use, unfortunately totally unsuitable for my.