Unfortunately, the originals of subtank Kangertech is no longer being built. Therefore, I have searched the net, whether it is still available somewhere in remnants. With Amazon I found it.
After the next day the postman with the device was there already, once huge joy for the fast delivery.
First disillusionment ..... The authenticity verification using the hologram code led to the conclusion that this device was not original of Kangertech ..... What the hell, I thought to myself, the original no longer get now anyway, so be testing the delivered times out....
With the included OCC heads works despite the great Liquid openings in the minds of the supply does not - despite initial moisten the winding came after the liquid was evaporated from the humidification nothing except Kokelgeschmack ....
Ibid an original OCC head reingebaut (I had of the Kanger subtank Mini (a real) - lo and behold, it works, even if the screwing difficult was because the chimney pipe probably a fraction is too thick for the top cap, it got yet installed get.
Encouraged by this ray of hope I have the head of the RBA operating rebuilt (other top cap) and the RBA with cotton (the supplied - unfortunately, no real Japan cotton as promised) - Result undampfbar because although the cotton was well saturated with Liquid is an extremely eckeliger taste to taste despite my really really delicious Liquids was the steaming ...
So equal both been exchange, cotton and winding ... This much my very poor workmanship on the RBA. Pol is not really plan on the insulator fixing screws are rounded down and said screw no wire guide means is milled with different like the original, which, of course, the terminals of the wire have impossible makes .... However, I can help me.
So winding it (according to the first measurement 1 Ohm), cotton pure (this time real Japan Wadding of its own stock) - steamed - and at least the taste was true now.
After a few moves but I reported both my Istick 50W as well as the K-20 Simar extreme jumping ohmic values, although everything was installed Ordnungegemäß. This issue so far I could not fix it, it is but probably due to the poor handling of the RBA.
So, at first back to an original OCC - head.
The draft with OCC's fine and is roughly equivalent to that of my real subtank Mini. When the RBA Ansaugwiederstand is significantly higher than the subtank Mini with miniRBA - I think the intake ports have been cut a little too small of the product copiers.
The Verschönerungscone is not to use because it only looks like the original, as well as any battery carrier can be mounted together with the evaporator due to the wrong pole extension.
As I have made experiments with the device and could make it halfway usable, I will not return to, especially since the original probably not really seem to be in the trade.
Two stars because the rest of the head is doing what it should, at least as far as I can tell. Sealing the system is, only during the filling has to watch one that you manually some pressure on the glass tank for top cap gets up straight, so he does not raussifft at the interface as long as the base is unscrewed.
Clearly no buy recommendation. I can say to the dealer, however, it worked the order quickly and smoothly.