After software firmware update a factory reset is recommended to carry out,
then the device retains the settings even after a power separation.
Currently latest firmware version: IR MMI FS2026-0001-0182_V2.2.15.EX45884-1B2
The radio switches to a power separation in the last abandoned state.
Will it be separated in standby, it comes again in standby and connected after switching to the network.
Will it be separated in the radio mode, is made connectivität after plugging in the power supply and the last station you listen to will continue.
In Hama on the website is erroneously listed an internal power supply.
Correctly, the indication that it is delivered with a wall power supply.
The sound can be adjusted via Equalizer (9 options):
- Normal, - centrally - Jazz - Rock - Soundtrack - Classic, - Pop - news - My EQ (bass, treble, loudness)
The media player supports creating your own playlists, and Repeat & Shuffle (Shuffle)
if I have created playlists remain in memory after a power separation not tried.
Even hard drives are detected serve directly connected to the router as a media server.
Podcast can not or 'coil' pause
When very fast scroll through the station list, it may happen that you scroll faster than the radio information from the network gets, which has the property that when very fast scrolling process the volume adjusted (station list from top to bottom - Alphabetically A -> Z - it is loud, Z -> A silent problem can be to turn not too fast and should the volume bar graph appear, just wait a moment, the display changes automatically to the location of the channel list where the switch.. took place.
The unit can store 10 preferred stations, is not equipped with transmitters shortcut keys.
Is it possible to cope with, but would be a nice feature. The stations are stored on the programming sequence.
The lighting can be separated for 'Switched on' and 'standby' mode in 3 steps - Set Low - High, - means
An egg timer I could not discover in the latest software release ... The device is indeed sold as Radio ...
An alarm clock with 2 alarms is integrated.
In addition, a snooze function is present, its setting time from 15, 30, 45 u. 60 minutes can be selected.
No, it is not necessarily a Fritz box to operate the radio requires that equipment connected also to routers and repeaters from other manufacturers. Some repeaters it can happen that it does not come with the clear parallel connect several devices and this results in WiFi breaks. This phenomenon is not due to the radio. The radio supports 2.4 GHz, but not the 5 GHz band.
The device slips in heavy keystroke only out of the holder if it has been twisted mounted. Hama has indeed an indication label for 'up and down' attached to the bracket, but not specifically for a 'front and rear'. Sinnig appears the Assembly to push the radio from the front into the bracket. So it does not slip when you press the keys out of the holder, might easily be forwardly removed from this, if one option to another with Internet and electricity (the radio is not designed for battery operation) wants to run-Powered place.
Dimensions:
Width (without the inserted power supply): 20.5 cm,
Width (with inserted power supply / plug): 23.5 cm
Depth: 13,5 cm,
Height (mounted with base plate): 7 cm
A quite successful, recommended radio at a reasonable price-performance ratio
