The bottom line is the same in advance, because I noticed at the end that it was yet again in great detail:
I find the S6 * in Natura * very simply elegant and handschmeichlerisch but only the protruding camera lens is already a reason to opt for a protection. (I had the first effective air Cushin model of Spigen bought comparison see below.)
To what extent you need an all-round edge protection as prevention, everyone should decide for themselves. I confess: In this expensive device I am rather cautious and take the simple elegance hence their appeal somewhat.
The points deduction stirred but by limiting the volume control here, the hooks from time to time.
****
This case is made of two components:
a) Shock-absorbing, flexible black shell with rear wall - made of silicone-like material.
b) plastic frames in metal (aluminum) optics. Embedded in this metal frame are the control buttons.
(The color combination of silicone case to outer frame varies in this model.)
(Tips for Smartphone insert, remove see below ;-)
(+/-) Cases * * contributes to minimal. After my discretion, so it does not bother me. But the feeling the user probably very different. (That the sleeve is flush with the rear of the camera lens, I see values below even be beneficial.)
(+) The appearance of hydric, minimalist acting S6 is thus improved not downright, but also does not deteriorate. So much time * * to the exterior that appears very important for me as a criterion, because who creates a brand-new S6 to it then to spoil with a bulky Tupperware bowl beyond recognition?
(+) * In addition, the sheath carries * not significantly, but has in any case the advantage of the rearwardly projecting objective lens is compensated by mounting the casing on a plane.
-> The lens closes up from the shell.
(+) The operation of the ON / OFF button on the right side is not restricted because of the embedded in the metal-like frame button can be buttery soft and without restrictions so do not operate in any case worse than the original button.
(- / +) To operate the volume, I feel not only as a constraint, but as a downright disaster, because this brings the cover losses with them, I do not like. The two original buttons (+ and -) are covered by the sleeve, and to operate the incorporated under Button replicas requires downright force.
When multiple on / off construction of the S6 in the shell / from the shell I then noticed that the volume buttons do not always respond so stubborn; but a method like the S6 as the frame replacements in the shell / that the buttons are not so stiff, I have not yet found. Maybe I am doing something wrong?
(+) The back of the cover, has a handy, rough structure, which allows the smartphone relatively non-slip hang relatively non-slippery at slightly slanted, even slippery surfaces.
(+) The recesses for Micro, speaker, jack are perfectly positioned. Extremely positive is from the beveled opening for the (underlying) with flash pulse sensor surface. Very nicely done.
(+/-) The smartphone is pressed into this slightly flexible shell has an art in itself, but it works relatively fast. Remove with a twice hold any witchcraft.
(+) The protection I can only preventively and estimate based on experience. To me, this combination as a very good protection when the smartphone (at low altitude) falls on an edge. (Intentionally I do not provoke the certainly; at my similar Samsung AtivS me similar cases have prevented the destruction by impact several times.)
(+/-) About price / performance I do not really * cheap *, that's kind of personal entitlement thing and the price is subject also to the variations I get no knowledge of changes.
My impression is (currently called about 25 euros) I find * hochpreisig *, but are me no downright favorable Altar Native jumped into the eye (Tip for 10 euros more favorable case see below, but also minimally less protection).
(+) Inductive charging is therefore possible (this was the cradle of my colleague used, since I myself have no such charging station.)
****
Trick for
Case Fit:
Remove aluminum frame of the black casing and put the phone only in the black bowl.
After that, the S6 press together black casing in the frame.
Remove shell:
First, remove the aluminum-like frame, then the S6 easy to break away from the black bowl.
****
Compared with the more favorable transparent sheath of Spigen (which I had already bought me with this envelope before the test):
Spigen ® protective sleeve Samsung Galaxy S6 shell ULTRA HYBRID [Air-Cushion edge protection technology - Bumper Case] - Case Samsung Galaxy S6 / SVI, transparent back cover - Crystal Clear [Crystal Clear - SGP11317]
Valent actually acts this 2 component model, due to the additional plastic frame appears (on my model in aluminum look) with the protection to be still a little better than the pure plastic (silicone) shell. For that, I'll go with the cheaper dish with the control buttons ready better Whether you're in this assessment useful?
