The extension of the trigger head for all EOS cameras with N3 connector

A remote release, regardless whether it is wired or infrared control, is always essential when it arrives sharp photos on blur and you do not get exposure times beyond 1/800 second state; not to mention long exposures of several seconds or even minutes! Even the gentle press of the release button on the camera, creates a small wobble. Preferably, one uses remote release in conjunction with tripods, supportive can here also the mirror lockup (SVA) are used, mostly via the camera menu set. That is one focus, pulls the trigger and now the mirror is flipped up, the camera can now swing out, then a second press of the shutter and the shutter opens and makes the picture.

The Remote Cord is a small hand-held device, which is connected by a 80 cm long cable with the camera. The shutter button has a button that takes over the function of the shutter release button on the camera. Pressing it halfway, it acts just like the camera shutter to autofocus. For photos with a long exposure time, this button can be locked by depressing and then pushes forward, this is then visible through a small mark with the color signal is now recognizable.

The manufacturing quality is very good, the connector is provided with a metal head that locks the eventual strain relief with the camera. A useful companion for shooting on a tripod. Suitable for all EOS cameras with N3 connection.

I thank you - you have found mistakes? If you have something unclear? Know more facts? If so, please take this opportunity to write to me.