WOW - the part can what - every morning in the shower like a holiday in the Wellness Hotel

The rain shower with 50 diameter is installed in addition to the normal hand shower with me in the shower with a 3-way valve, a Kirchhoff elbow and a second hose to flush. A wonderful and very cost-effective solution, since all the other showerheads are much more expensive in this dimension.
Bottom line, this solution costs significantly below 150, in this quality and size can be found at the hardware store and sanitary dealer nothing like how I have found after a long search.

USE
Personally, I find showering under the huge shower just wonderful - you stand here literally completely in the rain, depending on the setting in the warm summer rain or a strong autumn rain. An ideal start to the day, since such showers otherwise find only in nicer hotels or wellness temples for me each morning.

Who does not want to have wet hair should be looking for something fundamentally different, the Lord Raab has since designed some :-)

The shower drips some time after the end of the adventure shower slightly, you can speed up the process by even a brief glimpse at an angle the showerhead to the shower. Here then comes the water which accumulated in the shower plate has run out, then peace is. Me personally does not bother because it is dealing here with a maximum of the amount of a toothbrush cup and solution for me is not worth in relation to the at least 5-10 times the price of a high-end.

CLEANING
The shower can be in spite of extremely hard water with us very easy to clean because the einzelenen rubber studs of the shower plate to be moved briefly to allow the lime dissolves - goes into the large area the easiest with straight stem a back brush (or simply with hand over it wipe). Otherwise, the shower head is chrome plated, here goes free layering Wipe with a damp cloth.

INSTALLATION
All parts needed for connection to the support rod are included - you should read the manual before use or in any case the included screen in the ball joint. The complete installation valve to valve | shower rod on wall | ball joint at rainshower | rainshower at bar | hose to the valve and rod - test run - that is feasible in 20 min. I have the shower rod mounted in a corner, which made the production of an additional part made of sheet metal, as this is solution is not provided commercially so.

... Everyone who has seen the good part so far was hard done to, for rental is a good solution, since in this case must be no new drilling in Flisenspiegel and a good piece when you move can be taken.