Despite announcing GIANTS what they had to revise later, the LS15 has the old graphics engine. Nevertheless, the graphics a lot more effective than the LS13, though not perfect. Even if I wished for a new graphics engine that has the old engine for users with a weaker PC advantage, you can run the LS15 without problems on computers that were also sufficient for the LS13.
Installation on a Windows 8.1 64-bit PC worked perfectly, also the uploading of the latest patches 1.1, what to do in any case before the first games. That subsequent Laden after the start is really fast, I notice here felt no difference to the LS13.
In the beginning it give one or the other stuttering, especially when you switch on the light, the screen freezes momentarily (less than one second). But the longer you play, the less appear these short dropouts. I do not know why, probably it is a bug.
A nice new feature is, inter alia, that the sowing can now leave even the helper. The vehicles are now dirty with the playing time and can be cleaned with a pressure washer again. In LS15 there in the delivery now two standard maps (Westbridge Hills and Bjorn Holm, which I have played so far only Bjorn Holm. She really succeeded very nicely and become quite large.
With cruise control, there is unfortunately only one stage - before four stages, which you activate by pressing 3. With the keys 1 and 2 you can adjust the speed of the cruise control. A little complicated the whole thing, if you want, for example, go to the unloading on parallel next to a combine.
Rather negative is the new menu. Some would say you have to get used to it for now. Some other things this may be so, but the new menu is only cumbersome and includes some white even less information than the LS13.
What am especially upset, hence only three stars, are the numerous bugs. GIANTS had a million budget about two years time to develop, because one would have been entitled to expect more.
Recommendation?
Well, who you is so addictive and impatient to the new version as I can and live with the bugs, then yes. ; O)
All others I can only guess, waiting for the next one or two patches, whatever went quite briskly at GIANTS in the past.
Finally, a list of reported bugs, which unfortunately is growing hourly.
Bugliste (as 31.10.214)
Liebherr L538: badReferenceFrame @ zKinematic-ArmDummy / arm / Dummy
- Liebherr L538: Tongs for manure loading and Ballengabel missing
- Cultivators general .: draft requirement decrease slightly
- NH BB1290: reduce power consumption a little
- Kuhn FC3525F / FC10030: side panels not foldable (transport mode) / saver not foldable
- Tw. floating branches
- Traffic: cars go off despite traffic
- Vehicles slip
- No driver on the controllable vehicles
- Chicken: Game crashes when buying
- Ponsse Buffalo: Charged tribes slip too easily
- Horsch Maestro: Jump at work and leaves ungedrillte strips
- Ponsse Scorpion: If you have a tree and descends before limbing, the strain is not held
- Stepa: stands after reload a savegame rotated by 180 °
- Shine on vehicles and implements general too high.
- Amazone FT1001: Can not empty with attached syringe?
- Trees: Some voices sawed trees not Collis
- Rain: If the machine / equipment clean only halfway, not completely
- Chainsaws: would disappear if one collects and Restart the game
- Forestry: texture of stump missing
- Varifeed 18FT @ NH TC5.90: SW faster dirty compared to Drescher
- Kärcher: The MP of all players heard
- Cultivator: it is possible to cultivators everywhere
- Animals: The confirmation of the purchase should be removed
- NH CR 10.90: grain tank tarpaulin has wrong shape
- NH CR 10.90: Outdoor Cam too close
- Liebherr L538: Check blade recording
- Mod Maps from v1.1.0: load times higher (zipped Bjorn Holm 55sec, unzipped 5sec)
- MP: Opening doors and gates are not synced with other players
- Mowers: reduce power requirements
No litter visible in Plane MP: Kuhn SPV -
- Sowing: In Store not apparent which supports direct drilling
- Bjorn Holm @ Dedi: 29 field grown with barley (ripe ingame / statusmap) can not be harvested
- Sampo Comia: Missing textures
- Ponsse Buffalo Scorpion +: You get many slopes not high, it lacks a little power
- Ursus Wrapper: In MP the winder takes the first bale on, this is not visible from then, not wound up and will not answer further bales more (data / maps / models / objects / round bales / roundbaleSilage_w112_d130.i3d (1.78 ms) / Error : Invalid event id)
- Tire tracks: Slot number should be set in the menu
- Ponsse Scorpion: Saws sometimes without orders from trees, happens occasionally when the tool surrounds the tree. Here then also lacks the cutting Animation
- Fliegl low loader: Includes 14k bit too cheap
- Axis_Frontloader_Tool must be reversed
- Interior: mirror not in sight
- NH BB1290: After unloading the MP of the table is no longer hinged and the press can not be switched
- Self-Drive: circuit working Headlamps wrong (only low beam, then working lights)
- Kärcher: The pick and place the lance produces a clicking sound which can be heard every MP player
- Kärcher: The work order is not gesynced
- Kärcher: Charged SW can not be or are very difficult to clean
- Sampo Comia: mirror unusable, set incorrectly
- Mission time: In MP changing the mission time is not gesynced
- Grimme Tectron / Maxtron: lifting unit can not be excavated separately without the compl. Off machine
- Grimme Tectron: wide angle mirror left without function
- Sampo Comia: Incorrect Strohhäckselanimation
- Sampo Comia cutting: reel can be gone too far back (tines hit in cutter)
- Error message when gamepad and steering wheel "game engine 6:02 has stopped working" fix
- Speed: It is not possible, with the accelerator pedal (Logitech G27 + G25) to maintain the speed. Only the duration of up to Vmax is affected by the angle of the pedal
- Bjorn Holm: Floating building between field 37 + 38 image, west of Field 38 image, the Store
- Vogel & Noot Terra Disc: the front red position lights should be white image
- Sawmill: Sale trigger is very deep
- Amazone UF1801 + ZA1501: Change gravity, can no longer be raised after the fall
- Kuhn GA: Only grass swaths. For hay it deletes it and created a swath
- Stoll: The tines of pallet forks do not match the pallets (distance too large)
- Trees roll after cases tw. Lange continues
- Double occupancy: Plane close and lower front loader the N key
- By train: If you send the train off the MP, this will not gesynced with the other players. Train stops for players
- Case Magnum 380: texture pixelated (hood / roof / rear lights)
- Contamination: Before the machine dirty should first be removed the gloss
- Steering the small tractor sensitive than the large (50 ° / sec is ok)
- Dedicated Server: Currently only 16 characters. 24 characters would be good
- Ponsse Buffalo was After the savegames reload the loaded machine for nothing
- Dedicated Server: Vehicles slip even when pausiertem game
- Info Pages: Last viewed Info page should call when re appear first
- Machine: to narrow tire tracks
- Tires from locking during braking with pedal control and conversion, in general too hard
- BGA: tire tracks on the left Silo on the road in the air
- BGA: client sticks with the Universal bucket on ground
- BGA: a small ramp in front of the Fliegl Rondo Maten would be helpful
- Horn: Horn sound not to match the machine
- Kuhn VB2190: Bale look like straw bales
- Stepa FHL 13 AK: No PTO available and tractor does not work when it is operated
- Special offers should appear as a reference
- Sampo Comia: double occupancy for pipe extension and straw storage (Gamepad)
- Väderstad Tempo: After 3 tracks already sow dirty
- Bjorn Holm: grass growing in the shelter at the pasture image
- Deliver grain transport mission: Time Bonus greatly exaggerated (3000 premium and 500000 Time Bonus @ difficult)
- Lemken Gigant: When close to helper application in MP Graphical errors
- Lemken Gigant: during the folding process slips away the tractor
- Enable Gamepad, adjust control, game restart (Error: Running LUA method 'init' / D: /code/lsim2015/build/finalbin/dataS/scripts/gui/PlacementScreen.lua (129): attempt to index a nil. value)
- Capello Quasar F4: tips are not folded (Road Transport)
- Chips: A conveyor belt of stock would be useful
- Case Quadtrac: wave is not animated
- MAN TGS: Check price, was supposed to max. Cost 100k
- Error information board: (Error: Running LUA method 'update' / D: /code/lsim2015/build/finalbin/dataS/scripts/gui/BlackboardView.lua (188): attempt to index local 'mission' (a nil value. ) / Error: Running LUA method 'mouseEvent').
- Krampe SB30 / 60: Missing component and shadow change in use of the Plane
- Ponsse Buffalo: This is loaded sold, the trees get stuck
- Forestry: Trees give too much money in all levels of difficulty
- NH TC5.90 can not unloading on to Fliegl ASS 298
- Jenz HEM: crane camera is missing, props go too far down a back Attached HKD302 is not recognized by the ejection tube
- Ponsee Scorpion: Can not all tribes cases / limbing, since the length of max. 5m is adjustable
- NH T4.75: Collision strainer and Frontladerkonsole
- Kroeger HKD320: Unloading After just short explanation for loading from the silo
- MAN TGS: hitch be mounted forward without function back should a TrailerAttacher
- NH TC5.90TAM Iguana 24: chopper protection depends on cutting
- Deutz TTV7250 & Lambo Mach 230: front wheels have to be deeper, see handlebars
- Dedicated Server: When starting the game WBH is indeed selected, started, however, is getting the Bjorn Holm Map (Discontinued Map: Westbridge Hills / display in the web interface (Home): Westbridge Hills / display in Statslink: mapName = "Bjorn Holm" / display in Webstats WBB 4.0 : Bjorn Holm)
- Indicators: if fertilizer spreader is hitched forward direction is reversed
- Growth: would be handy if we could stop this in the menu (reasons: order all fields, several meadows mowing etc ...)
- Grimme Tectron: Plane of overcharge band is clipping in a conveyor belt
- Grimme Tectron: conveyor belt is clipping in the cylinder piston, the real name is. should move along
- Lizard Timber claw: Wrong attached
Edit:
Buglists (as 06.12.214)
***** Bugs that have been recognized by GIANTS as such and should be fixed in the next patch *****
- NH TC 5.90: trailerAttacher too high
- Liebherr Loader: main arm lowers far enough from
- Capello corn head: Will not lowered far enough
- Suer weights: Are my high pressure washer at one point only washable
- Kröger HKD 302: reduce dumping angles backwards
- Stepa FHL 13: hydraulic cylinder on the supports do not move
- Case 9230: cutting is lowered too far (combination of tutorial)
- Case Magnum 380+ Krampe Bandit 750: wobbles team if you abtankt with combine harvester
- Kuhn VB 2190 (Modhub): Press exclusively produces bales of straw
- Diesel consumption: increase (should last about 5 hours ingame)
- Wheel loader bucket: missing polygons on round bottom
- Liebherr Telelader: to use a tool with function, the device selection has to be operated. In order to move the arm to re-
- TAM Iguana 24: chocks missing
- When swaths of straw no PS is displayed. Only swaths in grass
- Horsch Pronto 9 SW - capacity target: 12000L
- Fliegl low loader: Rundumleuchte missing (heavy transport)
- Pallet tree seedlings: too heavy
- Steyr 4115: Check Heckhydraulik (top link)
- Pöttinger Novacat: Cancels not go far enough in small tugs out
- XDisc lowers too far from
- Bjorn Holmfeld 22: Terrain looking through the street
- Bjorn Holm biomass power plant: Park Lines float, a floating pier at the back left building the fence
- Stoll front loader: dumping angles not big enough
- Ponsee / Stepa / Jenz: The holding force of the pliers is too low, tribes slip out of the pliers
- Traffic: cars go off despite traffic
- Stepa: stands after reload a savegame rotated by 180 °
- Rain: If the machine / equipment clean only halfway, not completely
- Chainsaws: would disappear if one collects and Restart the game
- Varifeed 18FT @ NH TC5.90: SW faster dirty compared to Drescher
- Kärcher: The MP of all players heard
- Kärcher: The pick and place the lance produces a clicking sound which can be heard every MP player
- Kärcher: Charged SW can not be or are very difficult to clean
- Amazone UF1801 + ZA1501: Change gravity, can no longer be raised after the fall
- By train: If you send the train off the MP, this will not gesynced with the other players. Train stops for players
- Dedicated Server: Currently only 16 characters. 24 characters would be good
- Machine: to narrow tire tracks
- Kuhn VB2190: Bale look like straw bales
- Stepa FHL 13 AK: No PTO available
- NH TC5.90 can not unloading on to Fliegl ASS 298
- Enable Gamepad, adjust control, game restart (Error: Running LUA method 'init' / D: /code/lsim2015/build/finalbin/dataS/scripts/gui/PlacementScreen.lua (129): attempt to index a nil. value)
- Deutz TTV7250 & Lambo Mach 230: front wheels have to be deeper, see handlebars
- Dedicated Server: When starting the game WBH is indeed selected, started, however, is getting the Bjorn Holm Map (Discontinued Map: Westbridge Hills / display in the web interface (Home): Westbridge Hills / display in Statslink: mapName = "Bjorn Holm" / display in Webstats WBB 4.0 : Bjorn Holm)
- NH BB1290: correct steeringAxleRotation
- Tire tracks: Slot number should be set in the menu (!! via XML to be possible)
- NH CR 10.90: Outdoor Cam too close, indoor Cam too high
- Stoll: The tines of pallet forks do not match the pallets (distance too large)
- Jenz HEM: Support go too far down a back Attached HKD302 is not recognized by the ejection tube
- MAN TGS: Zugmaul forward without function
- Krampe SB30 / 60: Missing component and shadow change in use of the Plane
- Ursus Wrapper: In MP the winder takes the first bale on, this is not visible from then, not wound up and will not answer further bales more (data / maps / models / objects / round bales / roundbaleSilage_w112_d130.i3d (1.78 ms) / Error : Invalid event id)
- Liebherr L538: badReferenceFrame @ zKinematic-ArmDummy / arm / Dummy
- Bjorn Holm: Floating building between field 37 + 38, west of Field 38, the Store
- Bjorn Holm: grass growing in the shelter at the pasture (only occurs when you have created the savegame before the first patch)
- Timber Runner: zoom Runge distance
- Steering the small tractor sensitive than the large (50 ° / sec is ok)
- Liebherr L538: Check blade recording
- Lizard Timber claw: Wrong attached
- NH BB1290: After unloading the MP of the table is no longer hinged and the press can not be switched
- Mission time: In MP changing the mission time is not gesynced
- Deliver grain transport mission: Time Bonus greatly exaggerated (3000 premium and 500000 Time Bonus @ difficult)
- Ponsee Scorpion: Can not all tribes cases / limbing, since the length of max. 5m is adjustable
- NH T4.75: Collision strainer and Frontladerkonsole
- Sampo Comia cutting: reel can be gone too far back (tines hit in cutter)
- Amazone FT1001: If you can not with attached syringe empty
- Grimme Tectron / Maxtron: lifting unit can not be excavated separately without the compl. Off machine
- Error message when gamepad and steering wheel "game engine 6:02 has stopped working" fix
- Growth: would be handy if we could stop this in the menu (reasons: order all fields, several meadows mowing etc ...)
- NH T8.435: Rear wheel has too much slip
- Dedicated Server: Server does not create backups Score
- Errors in some translations:
Change control on the steering wheel, to delete all assignments not yet needed - -> Game will not start
- Control on 2 joystick switch -> Game will not start
- Fliegl Dolly: skamler slide rearward (collides with 25m³ barrel) and wheel diameter decrease (too high)
- Case Puma 160: If 203PS
- Bail collecting weighing: If client unloads and the table is lowered again, packetReceived error
- Liebherr TL432: Chock missing
- Amazone plow: Buy, fold, turn off: Not on the ground
- Deutz 7250TTV: reduce slippage
- Built-in dirt-speed levels
- Väderstad hydraulic
- Sampo Comia: Incorrect Strohhäckselanimation
- It thrashes in the helper mode for grain equal to rape, the ejection-PS is not switched to shredder
- High demand: prices to check
- Operating costs Kärcher too high
- NH Roll Belt: Coronas of the front running lights (white) attached to the tailgate and swing opening with
- Reduce steering speeds
- Maxtron: correct mass
- Amazone FT 1001 - Do not wash
- Kroeger HKD302: After unloading the direct short explanation for loading from the silo
- Sampo vs. small SWW: SW can not be dug up enough to put this on the SWW can
- Kärcher: Display in the left HUD "R Switch Pressure Washer" remains when you climb into a FZ with HDR activated directly by e
- Case Puma: windscreen shines through
- Kuhn Butterfly: PS lack of dressers in MP
- It thrashes in the helper mode for grain equal to rape, the ejection-PS is not switched to shredder
- Kuhn FC 10030: mount the cylinder piston too long in transport position
- Ursus 15014: wipers going through the disc
- MP: password of the client is no longer stored, has been fixed in LS13
- Sampo Comia: Incorrect Strohhäckselanimation
- Arcusin: The forks carrying the bales in the stack, collide with the recording mechanism
- Kuhn GA: If you switch the power on after purchasing or restarting of the animation of the arithmetic jumps
- Cruise Control: Saves the last selected speed is not to restart games
- Info Menu: total time the machined surface will not be saved and will start each time from 0
- Info Pages: Last viewed Info page should call when re appear first
- NH T4.75: Frontladerkonsole depends exhaust
- Kröger TAW30: Will not / hardly loaded by harvesters. Can only happen if the pipe is over tailboard
- Fliegl Bull: Can not be filled at any point of harvesters
- Chaff: income is too low, please check (revenue now tailored to German Average: 435dt / ha @ 32% @ TM 430kg / m³ = 102m³ (previously 92,5m³ !!))
- Liebherr TL: desöfteren dump angle too low, please check
- NH BB1290 / Roll Belt: Substituting the press back when there is still a finished bale fact that spawns on the press. If you hang the press again, it will be thrown around
- MP: After the server is restarted, the bales of not emptied NH presses hanging behind / above
- Store: Declared the blades missing
- Pöttinger Euro Boss: Can lie on uneven lawns in places grass
- Krampe BB900S: maintenance costs by 40 in relation to low
- Grimme SE: Can be folded, while the transfer belt is extended
- Grimme 260: With folded end of the unloading belt the potatoes still run in the original location further
- MP: Pressure Washer Display in Hud "R" remains when you get in the vehicle with high-pressure cleaner.
- MP: Kuhn Mowers particles not visible
- Time bonus missions / demands clearly too much
- Horsch Pronto: No-till possible, in reality, already
- Chaff: income is too low, please check (German average: 435dt / ha - weight 350-700kg / m³
- Fliegl Bull: give in case of heavy going of the rear tires of the tractor in the drawbar
- Case IH Axial Flow 7130 grain tank is full tilt towards the front, although the worm toward the left side raises
- MP: Weather forecast temperature at 0 degrees every day
- Error information board: (Error: Running LUA method 'update' / D: /code/lsim2015/build/finalbin/dataS/scripts/gui/BlackboardView.lua (188): attempt to index local 'mission' (a nil value. ) / Error: Running LUA method 'mouseEvent').
- BGA: Check the trigger Fliegl Rondomat - discharges onto you via this Liebherr TL comes at no silage
- Grimme Tectron / Maxtron: Automatic overcharging does not work, you must first go into the harvester and activate it
No litter visible in Plane MP: Kuhn SPV -
- Kröger TAW 30: Position of Abschiebers not fit when discharging to the remaining amount. Slide is almost completely back and there are still 35% in the trailer
- Dedi: Easyflow on BigX takes on grass, but it is not removed from the ground. Can no longer be included with LW
- Buckets / Forks: Sometimes the dump remains optically despite empty bucket capacity
- Ponsse Scorpion: Saws sometimes without orders from trees, happens occasionally when the tool surrounds the tree. Here then also lacks the cutting Animation
- Ponsse Buffalo Scorpion +: You get many slopes not high, it lacks a little power
***** Bugs that have been recognized by GIANTS as such and are still not resolved in the next patch *****
- Ponsee Buffalo: Change to the direction of travel is the direction arrow on the minimap in the wrong direction and cruise control moves in the wrong direction
- Liebherr TL: The outer right mirror shows exactly on the trim box
- Liebherr TL: The left mirror facing outermost
- Seed: Trigger works only on one side (the one that is on the farm)
- Mirrors in New Holland T6.160 & Lamborghini Mach 230 VRT not available, show only the floor in
- Puma 203 horsepower (instead of 160 PS), Magnum 380 435 HP (instead of 380 hp) and 692 PS quadtrack it would (instead of 620 hp)
- New Holland T6.160 & Huerlimann XM 130 T4I - flickers mirror surface on right side mirror
- General acceleration too high.
- The silos are filling up too fast optical, three Pöttinger Euro Boss fully and look like 30 charges (estimated)
- Brake equipment fully when the accelerator pedal
- Dunghill is too low level of max. 100,000 liters, just enough time for 3 charges of Strautmann PS 3401
- BigX mirror flickers
- Hürlimann XM: flicker mirror
- Flickers T6 rear view mirror
-. Jenz Hacker: Does not draw a Completely (approx 1m piece remains lie)
- Jenz: logs of deciduous trees is believed poor
- Jenz HEM581: chopper pulls a bad, trigger too small
- Jenz HEM: The auger should have a collision, then the tribes were also detained and would not always fall out
- Forestry: If a tree is pruned at the shop, all mitentastet not yet been sawn, same
- Exhaust: If you switch to an attached device, the flicker without transition increases
- Dedi: When working at the BGA in MP, it jerky at all players
- FSI: Sometimes the stump is milled away in seconds, sometimes it takes minutes
- Liebherr TL: Check performance, vMax achieved difficulties etc
- Lemken Diamant 12: front wheel depends in turn under
- Helper: If the helper when you exit the game is about to end field, the field boundary does not recognize after a restart and goes straight ahead further
- Grimme Tectron: buggt PS once you move the camera
- Helper: Drescher ride raised cutting further if abtankt nearing 100% level
- Large-Scale Swather: when schwadet straw, remove the stubble at the rear 2 roundabouts
- NH TC5.90: straw comes out in the wrong place
- Shop: Sold to the Jenz HEM while the tipper on the chopper and the chopper on the tractor depends, you can attach it to the tractor no longer tipper
- Stepa logging trailer: Logos are not dirty
- Controller: Still See the keyboard layout if there is no assignment for a Game Controllers
- Kuhn FC 10030, Pöttinger Top 1252 Kuhn GA 8521, Krone Swadro 2000 jump in the lowered state
- Vehicles slip laterally too
- Dedicated Server: Vehicles slip even when pausiertem game
- Trees Sync: [...]
[...]
- MP: wind turbine was 20% on offer - full price was deducted
- MP: chainsaws disappear after server restart (?)
- MP: Stepa FHL 13 - When lowering the crane at the gripper Mp fidgets.
- MP: New Holland T6 + New Holland 1290 bale Bigbaler come out wrong
- MP server crashes consecutively if you buy all 3 chainsaws and these are used by the 3 players
- MP: Client fall tree and pruned. For each new section, the branches are again set back
- MP: name of the client by the flickering screen once you get moving
- MP: fillplanes the trailer are not synchronized
- MP: Drescher - If when unloading the grain tank is empty, the grain tank and chaff / swath animation disappears, although it is still threshed. ([...])
- Dedi: In many machines the steering wheel is crooked, inter alia, the MAN TGS
- MP: blades can not be filled with the hangers! Trigger is detected, he also tried to tip, but then breaks off directly. (SP and host works)
- TAM Iguana Quattro: moves when you come in the near
- Ball Cart: TW. hover the bales, loading bales are pushed away, as if a collision prev. would
- VSYNC is out of sync, tw. the image flickers and warps
- Stepa FHL 13: After a score has been reloaded, the invited tribes of Stepa have disappeared
- Ponsse Buffalo: Stämmer tremble and slip on the surface Runge
- Cultivators general .: draft requirement decrease slightly
- Vehicles slip
- Horsch Maestro: Jump at work and leaves ungedrillte strips
- Bjorn Holm @ Dedi: 29 field grown with barley (ripe ingame / statusmap) can not be harvested
- Sampo Comia: mirror unusable, set incorrectly
- Tires from locking during braking with pedal control and conversion, in general too hard
- BGA: client sticks with the Universal bucket on ground
- Lemken Gigant: during the folding process slips away the tractor
- Forestry: Trees give too much money in all levels of difficulty
- Forestry: texture of stump missing
- Trees roll after cases tw. Lange continues (is that pines have no branches with Colli)
- Tw. floating branches
- Trees: Some voices sawed trees not Collis
- Ponsse Buffalo: Charged tribes slip too easily
- Ponsse Scorpion: If you have a tree and descends before limbing, the strain is not held
- Ponsse Buffalo was After the savegames reload the loaded machine for nothing
- Ponsse Buffalo: This is loaded sold, the trees get stuck
- The round bales (square not gestest) keep well on the prongs, one would like to put on the car pulls you often again down (despite working on the joystick)
- Sampo: straw ejection through sieves, was supposed to come on the shaker from the combine and chaff over the sieves.
- Indoor Sound
- Poettinger turner slips on a slope
- MP: When Dedicated Server will not be able to see all the bales AutoStack!
- Chopper ejection Aimed not always .When the first time to do it and who to then raises to a different location and the trailer already on the harvester has not judge it from
- Show missions in statistics
- The Poltergabel from wheel loader keeps the tribes not fastened properly and you can see the strains are difficult to access because it just pushes away / just like the Telelader
- Trailer: the two in succession, always displays only the total weight of the back and herswitchen, but not the weight for each trailer separately
- The silos can be filled, even if the tarp over it and is the fermentation process takes place.
- If: you swaths pressed into bales, green stripes are left instead of swathes. There would eigendlich as left and right look in the field.
- Hektarzähler twice stats
- At the slightest unevenness on the whole meadows Big X 1100 drifts in all directions almost Unkontrollierbar.Ich guess that's XDisc too deep or should adapt to irregularities something
Do not move the arm collision: FSI -
- Sowing machine Väderstad Rapid A 600S can be drawn from Deutz 6.61 Agrostar with 143PS without problems in the tooltip is but minutes 180PS at Rapid A 600S
- If: straw swath on Grasabgelegt is and it is then picked up with the NH balers. After that no grass is there in the lay of the swath. It also does not grow more after!
- The ball sales trigger is something ungüngstig for AutoStack because the bales on the roof lying down and fall back on the car stack. Maybe move forward on the wooden boards!
- Helper: When working with the XDisc the helper changes at the end of the field of grain on grass.
- Arcusin: After reloading the save game loaded bales have disappeared
- Moddirectory Path: Mod directory: C: / Users / Steve / Documents / My Games / FarmingSimulator2015 / mods /
- GL420: Model / Texture error bunker between the "funnels" is open and you can see through ... [...] ... yp_jpg.htm
- If too many leaves are trees like! Upfront Extreme Server Lags leading up to the crash of Dedi server! Then probably estehen Sync Error example 1 players joind on dedi server, then he is on the mini map to display field 30 to go to field 30 and no player from player 2 to see
- The helper turns. It would be nice if the helper would wait with his maneuvers so long until he has thrown the entire straw that would facilitate the pressing of bales in such a way.
- SHOP - working width of Grimme trucks missing (beet and potato harvester)
. - Occurs when: Ka I can not reconstruct assumed mission, with the loaded Kröger, as I was for the 2nd time at the shipping company I was able to press R anyway (visible in Menüü) and the trailer was filled with corn ( was under the fill tube also selected the 2nd drive underneath) Edit: Occurs when one moment during the filling includes the Plane of Kroger.
- Statistics: Resetting update when opening
- When: You KotteTSA has filled the overcharge container to the trailer was empty and it stops automatically when you now come back to the container is in the help text still "stop over charging". It all works when you press O twice now it is also going on.
- Oh still what I have noticed in the New Holland CR 1090 in the Interior flickering textures in the cabin at the top of the radio and the Instrumenten.Tritt but only if the track Drescher.
- Grimme Tectron: helpers invites not / not refuels from
-Zunhammer: Consumption of manure with Gruber is higher than the barrel (throwing wide?)
- Zunidisc the shop is under working width 3meter
- Increase Damcon range radius
- And another 58 bugs that can not be described in detail because of the number of words allowed here.
![Farming Simulator 2015 [PC Download] (Software Download)](https://img.tgreer.com/thumb/85x85/f/4a/f4a54daf17a8db89.jpg)
![Battlefield 4 - (incl. China Rising Expansion Pack) Day One Edition [AT PEGI] (Video Game)](https://img.tgreer.com/thumb/85x85/f/16/f1672d164a9a235e1783849b72a80a53.jpg)