The illustrated instructions for label changes in the housing cover, I did not necessarily obvious, but it worked intuitively. Take out the role, remove the lid sideways, attach labels, lid back on it. The roll is then inserted so again, that the loose cover is right. The labels are then led to the exit slot, a small lever allowing the readjustment already retracted labels, a button executes a form feed. Caution: The first label may come out poorly or incorrectly adjusted; the following are properly aligned on the divider.
Practical:
- Due to the thermal transfer printing method used is necessary to change only labels; Ribbons are not compels.
- For those who previously worked with laser label sheets: Here you get individual labels.
The supplied labels (Dymo LabelWriter Dymo Address Labels, 36 mm x 89 mm, white, 2 x 260 labels) do not cost quite 4 cents each. At Amazon, they are also available in the Spar SUBSCRIPTION.
When postage printing over the Internet one must note: Do not print the online version, but open the sent from the post link. In the print menu under Properties - Advanced choose the right label. Set In size "Actual Size".
Attached is also a "Monthly Cleaning Card" for cleaning the print head. According to the name that will probably take place on a monthly basis; so monthly costs of just under 5 Euro for DYMO LabelWriter Cleaning Cards for All Writers Label, 10 pack (60622) are added.
The 2-year warranty can be extended by registering for one year.
Conclusion: Flott and practical, I can recommend.