When attaching the back plate to hang the monitor on the LG device I realized that to screws for the LG are obviously too long, because an ugly popping noise ceased before the bolt was stuck. LG has probably seem shorter screws in mind when it comes to hang the monitor. The problem could be with some other washers from the hardware store and fix is of course no shortage of the monitor holder represents. When BenQ there was this point no problems.
The guide is illustrated course and left me with nothing to be questions. The monitors are mounted with an art wing nuts (normal mother in a plastic housing) on the swivel arm. If a holder these nuts could tighten with tools, possibly because the threads are not cut cleanly. A suitable spanner is after all. And finally the sensitivity of the gas spring by also the Allen key must be set so that the monitors maintain their position.
In conclusion I would say that this is a very solid structure that is unbeatable in its price-performance ratio in my view. The shortcomings with the nuts or the seemingly unusable anchors can not detract from the very good overall impression, so full marks.