With this mount you do not mess determine which smartphone / cell phone you want to use: It fits for all devices with a width of 51 up to 95 mm.
Fixation is achieved with powerfully contracted by spring steel wire bows (stepless).
Both the lower support pin and the lateral retaining straps are covered with elastic plastic, which avoids scratches on the cell phone and a secure grip guarantees.
The asymmetric Auflagepad the back (lettering TaoTronics) is also rubberized and ensures extra grip. The rest of the supporting back is not rubberized, which has the advantage that the speaker of the unit is not sealed and the sound is so still transmit reasonably well. If the speaker is located in the center of the phone (that is exactly the "TaoTronics" -Gummierung) the sound is pretty strongly attenuated.
Who wants to make sure that will not possibly keys or connections pressed or concealed by the brackets on the smartphone can see my photo: The position of the holding elements I dimensioned (in mm).
As already described by other customers, is the insertion of the mobile phones with a certain force (skill, two-handed ...) connected. (There are in the market mobile-specific holders who have all necessary cut-outs in the correct place: here the insertion of the device is simple and comes with a handle.)
This Tao-Tronics-holder is universal and they must not throw away when you buy a different phone. Although several people with different devices using the same bracket, this is no problem.
The suction cup (diameter 60mm) is very strong and keeps on super smooth surfaces.
Through the ball joint at the transition from the arm of the suction cup for phone holder the device by up to 30 ° can be / pivoted down and left right up /. A clamping flange locked by this ball and socket joint: The nut must be tightened quite strong but so is not restricted by the position of the vibration joint.
With the delivery is also a small bracket with four elastic tongues. This part is intended for plugging in ventilation grille. In my car I have no ventilation grille found where this holder fits easily:
The air jet can be adjusted by the weight of the mobile phone
The holding tongues are too thick (do not fit into the grid spacing)
The holding tongues are too long (my airducts too shallow)
The clamping is not enough strong.
-> This part I could not use
Conclusion: If different smartphones on the same holder are to be exchanged, this is the mount of choice.
The price: well close to 100 it will certainly not remain - otherwise the thing is too expensive.
NOTE: Included with no power adapter for car socket is contained: mitbesorgen separately!
