I did it in 3 BJ2009 with Shadow-Line interior (see pictures). Attached ... This is critical because the structure of the trim strip is higher than the standard bar.
The assembly of the clip lasted less than 5 minutes and so I went with a lot of caution ran!
IMPORTANT CONSIDERATIONS: The clip is attached to the bottom first and carefully lifted the cap Clip the trim ... The clip slipping almost by itself behind the bar ...
Now you can carefully position change or adjust anything!
If your above the bar carries on uses please NOT the CAP Opener ... Who rashly thus bypassing damaged possibly the cladding and has an unsightly bulge in the dashboard ...
It is enough to clip only to press with caution ... If he's far enough pressed checks if the clip is securely latched behind the trim ... (These are only a millimeter). I have fixed the clip with the adhesive strip think but that is not absolutely necessary ...
When pressing tighter I could then find the tape of something very sticking and the clip is engaged only with firm pressure behind the bar ...
So please push up with feeling and intuition the clip ... Do not use the CAP Opener ...
What I can not imagine I ever abbekomme the clip again (What is usually not necessary) since the firmly seated behind the upper trim strip !!!
Conclusion: Highly Recommended ... because another clip with a similar assembly but magnetic holder for the device I did not want to try first ... Thanks to the replacement attachment can later also other devices attach to the clip ...
