Bought in the electronics store where I get my 40 "Philips TV there were only holders in the 200 Euro league. So I've looked around and ordered me this model on Amazon.
Installation was pretty easy. One only has to think carefully at the beginning where they as to be mounted exactly on the wall the bracket is not centered behind the TV. As for me, the holes were not 100% vertically into the wall and mount Währe been installed wrong, I have the holes in the wall screws come reamed to 9mm. Then, unfortunately, one of the hexagonal screws me is bein reindrehen demolished (but fortunately was a bottom of the). When tightening the screw kits with the spirit level the check holder is as straight as possible. When the TV is then rangehängt to the holder, it must be aligned exactly horizontally. That's the only assembly step in which a second person is helpful. It must be solved 2 nuts to align the TV. Here, of course, all slips like when you're alone here. A 2nd person that the TV holds facilitates alignment very. But it is also alone, then takes only 2-5 minutes longer.
ATTENTION !!!
Since there is only one adapter plate is here, all in the 100 x 100 or 100 x 200 mm distance on TV who look at whether the adapter plate would hide any connections their mounting holes. Since this adapter is designed for holding up to 200 x 200 mm. If so look rather to another holder.
The support I can recommend to anyone.
My 42 "TV by Philips now hangs perfectly on the wall.
There is a ca 7 euro more expensive wall mount which is then suitable for up to 55 ". In my opinion, the holder is the same as this one, has only additionally another adapter plate.
