I wanted to have a combination boiler for Vertikultieren and airing and because of the good reviews I ordered the Atika VT32. When I got it, I was quite surprised: While the housing and the height adjustment are different from my old device, but the Vertikultierer- and fan rollers are exactly identical.
The Vertikultieren went well out of hand. The device drives quasi forward themselves. The result is fairly evenly, if the floor is level. In some uneven places the result is somewhat uneven, but that I think is inevitable.
The fan rotates at Walte resistance by self: When airing Similar problems as with my previous device demonstrated. If you have the lawn so do not shaved very short, so how to do it when Vertikultieren, lawn presses against the plastic of the roller and thereby stop it. A ventilation is therefore not possible. I place I the depth so that the roll does not stop and continues to rotate nicely, the wires of the roller ventilate unfortunately nothing more.
Now I still have hope, which is the drive better than in my old unit, because there turned sometime during Vertikultieren the transmission through.