The following device configuration should be switched from the HDMI Matrix:
Output A: Benq TH681 (. Wg audio output on Receiver)
Output B: Samsung TV
Input 1: Media Receiver
Input 2: Bluray / DVD Player
Input 3: Xbox 360
Input 4: PC
Although I have invested in better HDMI cable since the Test 1. HDMI Matrix (deleyCON 1m from the devices to HDMI matrix 2m to 7.5m for TV and Beamer) is the result of more than disappointing.
Positive compared with the 1st unit: The Telekom Media Receiver works on both outputs and all inputs go on TV and the relatively reliable. But if the input is switched to output 1 A and the input is 1 already displayed on output B, the image on the output B at one second intervals and output A blinking remains dark.
Some times it is me even managed to see a Blu-ray on the projector. This, however, only after the production of this configuration and the off and on again the HDMI Matrix. But when I turn to SPDIF is the image path and the receiver switched between multiple audio signals back and forth. It looks as if the switch could not be decided.
I had the most success after switching to a constellation and then restarting the HDMI Matrix. That would have been an option, but SPDIF turn the picture has repeatedly shot down on the projector.
Unfortunately, too unreliable. Sometimes it works halfway, then not again and after switching, or switching the sound, the image is gone.
For the price, I expect a lot more reliability!
So I have the device unfortunately return again and further switch manually with a "5-port HDMI 1080P Video HDMI Switch and IR Remoter Remote Control" (in the meantime, the remote control stops working) and a "Liqoo ® HDMI Switch Switcher manually bidirectionally 1X2 2X1 3D 1080P "for switching to TV or projector.
Somewhat more complicated than with a matrix, but works as opposed to the 2 previously tested devices that are also 4x as expensive and their function is totally inadequate.
But I give the hope not to, maybe it will work with the next matrix ...