Devices in the set and function well - Installation Guide incorrectly
Since the 5 wireless detectors were extremely cheap I despite the lack of customer recession decided to buy me the set and tested.
After an hour and 10 times reading the manual and countless functional test in set my family would have stoned me soon. - Loud pipes throughout the house -
With the enclosed operating instructions, it is impossible properly to also set an IT specialist in the set a reasonable time in operation. The included user manual is simply wrong. After searching an instruction manual on the Internet I found a tried and the equivalent type. - Hits - Ruckzuck was the installation and the test is successful. Now I have the smoke detectors installed 2 weeks and the sporadic function tests are very good. Since no customers Recession still existed, my all Amazon fans is important to provide a basis for decisions.
Positives:
Delivery: Amazon Sacom very good
Price: very good
Volume and tone frequency: very good - but also very annoying
Alarm transmission from one device to another: but a few seconds delay very well,
Installation (with proper manual) good.
Negatives:
Manual: incorrect (keys and colors were mistranslated)
Actually no rating because as ordered not working
But the product is very good: Because of incorrect manual only 4 stars
Link at the right identical manual:
Googel search: Smoke Detector KD-101LA manual
TEST
1. Insert a 9V battery and 3 pcs 1.5V batteries (see image).
2. The red alarm LED flashes approximately every 40 seconds in the on state (see picture).
3. Press the TEST button for a few seconds, the alarm and the Learn LED (red and
green) LEDs flash, then the smoke alarm sounds. This shows that the smoke detector in operative
State (see picture).
LEARNING Programming
Setting the central smoke detector / the activated smoke detector
1 After commissioning you integrate the smoke detector to the online system. Press
the LEARN button, each time will change the LED LEARN from red to green or vice versa.
2. Central smoke detectors: Please make sure that the indicator on the LEARN button is GREEN.
3. switched in smoke detectors: Please make sure that the LED zuzuschaltenden the other (
Smoke detectors) RED.
4. LEARN process: Press the test button of the central smoke detector for a few seconds,
send out the signal to the zuzuschaltenden smoke detectors. Now flash the red
Alarm LEDs de zuzuschaltenden smoke alarm and the siren sounds. Then press
the test button of the zuzuschaltenden smoke detector for a few seconds to the signal to
send the central smoke detector. Then the central smoke detector receives the signal and
also the siren sounds. The setting is completed.
