Now the Cam itself. As with B-Ware usual, a reset to factory defaults. After that camera is connected to the router, supplied via a browser and IP with the latest firmware. Then the mydlink account created. The quality of the images is accordingly well for a surveillance camera, who will have to look elsewhere HD. Although it is an indoor camera, I have attached the outside under the roof overhang. There it is protected from rain. Lt. Google and Youtube, the device has not squeamish with the moisture and is under certain circumstances outside usable. A Dlink account you only have to create if you want to access the stream from the camera via app on iOS or Adroid. The motion detection and the e-mail delivery of the images is also possible without the Dlink account. For this, the configuration via IP and the browser in the camera software must be performed. The sensitivity for motion detection is good, they should not be set too high, otherwise you will be bombarded with e-mails, because the camera reports any shade or each blade as a movement. Furthermore, you can define which areas are to be monitored from the image on movement. You have to enter the access data of an e-mail account for sending e-mails, I have specially created me this a Google mailbox. This all works well. I get in motion an email with six images and can if necessary on the Dlink app live off on the Cam.