I had the bag return mail returned with the remark that you've obviously sent me a bag for the big 3,5er plates. According to the description and picture but it is intended for small 2,5er. Amazon has dutifully apologized for the "mistake when Packer" and sent me immediately a new one. Again the same, much too large bag. Now I was taken aback and I looked at the exact dates. Was probably my fault. The internal dimensions are correct given as 15 x 11 cm and therefore far too big for 2,5er plates. On the other hand, not my fault, because I let myself be fooled by the photo: As you can see a metal hard drive enclosure and an exact match in terms of size mumbi case. But that can not be true! For an external 2,5er (with housing, of course, so for example, my Western Digital MyPassport) it is much too large. Because remain in length 4cm and 3cm in width. In terms of volume of 4 pieces fit in. But for a 3,5er with housing it is too small. The only thing that fits perfectly pure: A 3,5er board without housing. But for something you do not really need pocket. At the Fesptlattentasche a loop with a snap hook is attached. This should have been able to save. No one thing hangs so the belt loop. Strange also: Inside, there are 2 networks on either side of the show but from the openings in opposite directions, are so mounted upside down. One puzzling about the meaning. But it turns out, at least not from the networks. A strong smell I can not confirm at my pocket. Still, she goes back, because the picture shows a precisely fitting for 2.5-inch pocket, but in reality far too large and therefore not suitable for the desired purpose.
