I've been looking for an old laptop hard drive a new and not too expensive home without own Netzeil to satisfy conscious but with USB 3.0, the Case of deleyCON seemed these demands and so it was purchased.
The package includes the case, the mandatory USB cable, an artificial leather cover, two screws and a small screwdriver.
The top of the case can be easily pull back and the inner life lies ahead. The small board with the SATA port is secured with two small screws at the bottom (not with hot glue, as described in part).
There are no rails on the hard disk or other attachment options, but the installation is very easy;
I did not even need a minute to the whole process of opening the case, inserting the disk and Closing the case.
Due to lack of guides the HDD rattling a bit in the housing, but this can be easily remedied by a strip of adhesive tape or paper.
The screw for the cover should be tightened carefully and with tact, Grobmotoriker strip the threads here probably very quickly.
After that, the external hard drive is completely and the stability is sufficient for everyday use if they are not just used as a projectile.
Recognized they will easily and Windows and Linux, although the speed is no new records, but is much higher than USB 2. Speed freaks will probably grab anyway other solutions.
All in all a more than affordable housing and for my purposes perfectly adequate.