Lt. Item description carries the bracket 30kg and has a wall distance of 75mm.
Well, I was quite amazed when the holder then there was and on the package now was of 60mm talk! I also found it confusing that are mentioned in the package two model numbers (RW R11 / RW R12). The Gewwichtsangabe missing on the package completely.
So I opened the package and looked like a sheet or the like and found the 1-page assembly instructions. Again, 60mm wall distance were given and even 35kg maximum load.
Therefore 0.5 star deduction, because the product description in terms of weight and in particular wall spacing is wrong (at least unclean), and the fact that the weight is not indicated on the packaging.
I unpacked the rest and was here as far done positively. Mounting hardware is available (15mm 32mm UNF screws M4, M5 and M6, spacers for z. B. curved TVs, plugs, ...). I basically take care of themselves to the mounting hardware, I can make no statement about the anchors - the rest is completely ok.
The mount itself while on the face of even a few scratches (black on black) but honestly, who cares really? The page shows against the back wall of TVs and the whole lagging behind so close to the wall that scratches are not to see anyway - at least in my case.
Now the assembly, or the assembly instructions - because here I see also still potential for improvement and also the reason for the next half-star deduction.
The mounting material is distributed in sachets, which are numbered from AI, the instructions always speaks here of up J. This is because that the washers for the screws are together with screws for wall mounting in a bag. It is now but not so that the washers would bear the letters J. Ultimately, this is indeed not a big deal, but that creates confusion in the assembly with assembly instructions.
What is absolutely out of the assembly instruction itself is not immediately evident that the wall mount must not be disassembled - I rate thereof also strongly against that is only unötig fiddly screws to the back with the weight of TV set on the wall. Also missing dimensions to the hole spacing of the wall mounting. Sure you can measure it, but it could also be simply stated or you put in even a paper template. The "long holes" of the wall mounting maybe half a millimeter to be "tight" - the holder can only be very difficult "push" on the screws.
So aussmessen everything beautiful, signs, drill, plug in and the TV with the whole bracket on the wall - done. This idea makes me happy, because you have to do so not much thought about what is where and how to mount.
I also recommend the screw for the pivot adjustment still to attract - with me it was realtiv loose.
The screw for the tilt adjustment, however, also has room for improvement - because even if it is so firmly crossed that the TV weight not adjust the angle of inclination, it can still rotate around the axis of rotation of the screw - definitely ugly! Because in my opinion, the tilt angle should already be reasonably clear before (so you can tighten the screw properly without the TV constantly up and hang out), a rough-grade scale would possibly also helpful.
Total've just been very pleasantly surprised by the wall bracket due to the low price. 5 stars I can due to the described details (Different item description, installation instructions, tilt screw, ...) but despite the price not be - here's just a little room for improvement. Material Aqua formality and delivery go perfectly fine - there were 5 EUR more no problem.