For Windows ok, for Mac a disaster, WifiDirekt gestet with IPhone5 and web administration of both systems

First of all, I'm even in the IT industry and had partly problems with the installation. Mich has tasted all day on time to the part went well. If one reads .. Super / class that is probably due the use of the printer only to one system or may not operate with all of the printer ago are people therefore only times only the 1nen star.
Had previously the identical color laser, the right back went for defective at Amazon, now I have decided for the M2070W / XEC. The term M2070W is identical.

Unpacked 1) printer and the adhesive protective strip removed. However, a strip went into the device. It was not clear how this is to be removed. The guide was not really helpful. Since I already had such a printer, I knew that you could open the part here, and thus the adhesive strip is removed, as well as the transport lock for the toner.

My first mistake was that I first wanted to print to the Mac, although I do not really need ..
WPS function of the Fritz box is activated (= my wireless router) and WPS enabled at the printer, now the printer in the network was involved. Blue status LED light on the printer.
Said on Mac in the printer Config - Search> Printers and RatsFats he had found and involved the Samsung. MacOS10.7 !! The first term was immediate and was ok. When trying new always came the error "Print file was not accepted" Hää? No matter what I printed, Captions .. nothing was more, printer back uninstall / install, no matter always the same error. Initially thought because the printer after 1min. went into sleep mode, it possibly. could be because? However, it turned out later than NICHTENS.

2) Fuck it I thought, need him only under Windows yes!
Included in and printer driver CD installed in selecting course I WLAN connection chosen, although my Windows computer was connected via network cable to the Fritz box. So clearly this is not what is meant.
However, the software checks the setting and corrects if necessary
The Moment of Truth, printer and Windows device stand right next to me. Printer is in sleep mode. I'm going to print image, it starts running immediately and prints. Wau I thought ... immediately tried everything possible, as well as screen printing, etc. everything works fine! Why does not the under the Mac I thought and was pissed. Something played with the PRINTER Windows and lo and behold, there are the web browser via Config is called -> "Sync Thru Web Service" Here the printer can be configured as WLAN / Wifi direct or toner consumption, etc, etc! Function does that only when you log in the upper right corner. Well .. just like account? Google helped, for me it was USER = admin, password = sec00000. There's only 2 possible Accounts possibly googling ... After I had read the password for the printer WifiDirekt display, is here with a PIN 8 digit number. Wifi-enabled direct - quilted (read in the documentation on the CD) enabled> on the display and the part.

3) With the iPhone's works immediately
said the Iphone with Wi-Fi looking, he immediately took the direct pressure Samsung, the password (this is the PIN number)
entered and already he printed everything I gave him. Select eg a picture below then click the icon rectangle with arrow outwards, then comes forward to eg email / Facebook etc. here the printer and confirm, class .....

4) Now back to the Mac
According documentary Insert the CD and click MAC_Installer. Sigh .. did on MAC_Air no CD_ROM, from matter to Windows and a release, the Mac sees the release is not simple, clear failed .... ÖkoMist, the win-computer is in sleep mode, nothing works anymore, must the box reboot. Grrrrr .....
Turn now to the share but see nothing of MAC_Installer, looked high to Windows and there. There's nothing. Oh man!
According to the manual that comes you guessed it until MAC_OS 10.8! ?? I have 10.7. Hmmm .... Usually it reached me, do not give up, get me the printer driver is somehow Webprint. Made short can not. Watch again on the Samsung side and then figure it out finally that there is no difference between the 2070 SL-M2070W, M2070 and the M2070M / XEC.
Well that one must know, is indeed nowhere. Hab then 20min. Used until I had the MAC Teiber found.

5) Now everything is good ..........
Driver in MAC installed. Go When asked to call the driver, be sure (already there) in printer selection and selecting, there are only the 1nen Samsung, select this. At least it was for me like that. After that, it looked exactly as before also ... image selected and said print !! Printer icon below goes back to red. Grrrr .. That is again "print file is not accepted" Now I was the freak !! Hab then stopped and restarted the printer as X times before and even (as if by magic) now he printed without hesitation, häää? -> No matter what I did it worked. Oh man I was now happy.

In summary it can be said
Windows users -> no problem 100% ok At least with Win-7
WifiDirekt 100% ok. Knowledge or read required
MAC -> just bad luck or a bug? According to MAC colleagues there's no problems with the MAC's -> exception to the rule as it seems?
Printouts go really fast, only the quality of images is not as good but still sufficient.

5) recommendation
I would buy again and again, clearly :-) him now I know myself so from ...
For non EDV'ler or rather which are at loggerheads with the art, I recommend the printer in the shop to buy and set up at a cost of 30-50 euros, mostly to be installed. Anyone who thinks Jaja that's no problem at all will be remembered may mark my words. I had bought the printer on recessions here. If everything works and you do not use all the functions that may be true. Only the surplus can quickly back to go.
And what I do not even know is, are the TONER generally filled only up to half, sometimes even only a third, tzz ...
So ... now geniese my printer and will only read the recessions are bad,
justified my a ...
Should anyone need assistance mail to "der_muc at web.de" the (at) is klammeraffe ....
Hope you have helped, at least I was helped with Amazon releases often ....
So I've taken the time to write this, at 6h Troubleshooting the 1H falls no longer big into weight

I still write an addendum to 1ner week Hardcore mode

Greetings and good luck to all .. reading this and want to buy a printer ... :-)

****************************************

SUPPLEMENTARY 21:11:13:
The printer is now in continuous operation since 1-2wochen. everything is working properly.
must even say that I am extremely pleased ... and we use it all extreme
whether daughter with Win / Mac or smartphone, everything is going as it should !!
no problems with sheet feeder or or .. copy function is great.
best but I find the sleep mode, after a few minutes. (Adjustable)
he goes down, only the blue LED can be seen, now comes a print job (WLAN)
It takes only 1-2 sec. and it will print immediately going, whoosh 2 sec. and the expression is as :-) class
without the mac issue what well now working properly, I would now assign all stars
1 time I was even asked for help, then had the mac drivers provided.

Well .... hope I evt. one or the other could help
to me at least was already öffters helped by recession
Thanks to all at the point ...