Quote: ================================================ ====
Technical Specifications:
- Device-specific fit
- Outer material: leather
- Lining: microfiber
- Sleek, elegant design
- Slim case made of high quality leather with Forcell - logo on the front.
- With belt loop
End quote =============================================== ==
For device-specific fit for the following comments:
To have targets for pulling out of the device from the case, a design with recessed upper corners was chosen (this can be seen in the pictures already well).
Unfortunately, however, the overall length of the case is also advised so short that the upper edge of the Milestone 2 protrudes about 5 mm above the top of the leather cases. Thus, despite the great protective sleeve, the upper edge devices effectively completely unprotected. And I'm especially worried about the corners top left and top right of the device, in spite of supposed Cover soon least likely to lose their paint in dynamic contacts with the outside world. --PUNKTABZUG
In the width of the actual dimensions is made quite accurately. With my brand new shell acquired the lateral play between the equipment and casing is estimated 2x1mm on the narrow sides, and it fits very well in the device thickness. ++ POINT WIN
For exterior and interior material:
1) Leather as an exterior material was important to me because it promises durability and robustness. Was processed here in a leather Nappa Type with valuable haptics. Until a final sideways above the frayed seams are clean and visually appealing. ++ POINT WIN
2) as microfiber Lining was important to me, but it promises to optimum protection of the display (possibly with a certain cleaning effect). Anyway, soft, flexible microfibre makes when entrained particles that this does not scratch the screen, but are at the site simply by offering the space particles off the display. To my bitter disappointment has the words' - Lining: microfiber "as factually proven completely unfounded: Even the interior material of the cell phone pocket is apparently Leather, moreover, not the soft Nappa the outside, but a harder, firmer varieties, so rather inconvenient if it comes to screen aging. - Point deduction
3) When I had my Milestone 2 inserted for the first time and was withdrawn again, smearing the display. A sampling of Etuiinneren showed that obviously had been for the cause nor the leather adhering adhesive residue.
One last point:
To test the Stop-Out technology I have the case clamped situated therein Milestone 2 upside down (on the short sides) between thumb and middle finger and briefly shaken. The result was:
my Milestone, quickly and easily. Nix with Stop-Out.
Conclusion: If you want to be Milestone is perfectly protected, or who wants that it goes no means lost time, because it has slipped out of his pocket, which should better look for another solution. Otherwise, given the low price very classy and representative acting solution for the briefcase and the desk.