Good light, but not perfect

I ordered 2 of these lamps for my bathroom. You should replace two 60W tubes were mounted above the mirror and the sink, here I need all-round light in addition to the vertical luminous ceiling spots in order to illuminate my face in the morning can care.
I have frugal 5.5W LED candle E14 (~ 40W) bought, although slightly yellowish light, but in the strength roughly match the previous 60W clear glass tubes.
The first impression is positive. The matt-nickel look suits my remaining lamps and sees quality of the processing of the metal case is impeccable, the lamp is connected quickly and mounted, the switch, which I really do not need is, properly, visually I however would have rather a flatter gewunschen because he found I something all bulky, especially since I do not use it.

Unfortunately, there are also a few disadvantages but a little cloud the overall results:
- No connection for grounding. Especially in the bathroom I would have something like this gewunschen me.
- The desk. Nice to have, unfortunately unnecessary for me. Without I would have preferred. Discreet would be nicer. But is OK.
- On the sides of the metal case is unfortunately not shown the screw, this is unfortunately not nearly as attractive as the front side, because the screw is exposed and the case where no plated through. This would be better to solve.
- The glass tubes and the mounting for selbige: the total of 4 glass tubes of my 2 lamps are all different lengths (+/- 1.5 cm) wide (the tube at both ends themselves), thick (glass thickness +/- 1,5mm) and unclean edges cut off partially. Here I would have a clean gewunschen 2cm clear conclusion as with other lamps in my example, looks noble out, but at least a clean round ends without injury would be desirable. These tubes are then a bit tedious and quite a lot of power in a hineingewunden Gummiquetschdichtung (no thread!), Although keep you safe, but could not get easily and clearly visible all through down. There are indeed resolved any metal clips that should perhaps help here, but the very poor description shows nothing recognizable, explains the benefits and application of these metal clasps not and try around even after half an hour I so can not do anything, what would have worked. Now I have small parts of the stalk of cotton swabs stuck underneath, holding the glass tubes in the horizontal plane.

Once the bulbs are completely assembled, I put together the tubes to the appropriate size and edged ends have turned to the lamp or back / up, they look really very good. However, the maintenance (tedious pinch, cotton swabs) is rather annoying, but hopefully not happen too often due to LED.

Conclusion: the problem with the uneven and very cheap made and bad to be mounted glass tubes would not have been that but have a large proportion of the optics, I would have chosen myself between 4 and 5 star, so, however, all in all, I would like, despite the fairly good final result only 3 stars awarded. Contingent purchase recommendation therefore, some tinkering and possibly conversion should be taken into account.