Until now I had Brother HL-2030, of the Fritz box via USB router (network) was connected. Since the toner lt. Brother (LED) * was empty and in particular the price of the printer are really low, I came up with the HL-2250DN (network and dupplex). I looked for small, not so high printer (as HL-2030). Furthermore, I wanted to be able to access the printer via web.
Ordered and jerk also delivered twitching (now ^^). Unwrapped, connected and installed without problems.
First I Status Pages (3xGO press) ==== >>>> oh you beautiful ...... I thought to myself, left and right vertical stripe / Abbdruck of the rollers (independently. If I in normal or dupplex have printed mode).
Well, do not panic, I thought to myself, then I search in the internet. As it turned out, many users are so affected (Brother HL-2130 | HL-2240 | HL-2250d / dn |! And even HP printers). Solution: None! Those who are likely to experience it, the devices have returned.
I wanted the printer and return it: put the request, packed the machine again.
The error did not go out of my head. Have bought several varieties of paper (80g / m2 + 90 + 100), unpacked printer back and tried: still minting.
(Ie discharge) Paper-out rollers cause it: A closer look at, you quickly behind. When asked why, I had to expand and find the paper output unit, that they are inserted spring too tight (too much pressure).
The solution: spring (left and right) cut a little (the two middle I did not cut). Now the HL-2250DN prints last as he from the outset should also print! The printer I keep course.
Résumé:
For the price of the printer for the home office is a good choice. I hope for other customers that they get the HL-2250d (s) without the above problems.
Nevertheless I forgive 4 stars because the device itself is very good (without embossing it would 4.8-5).
* For details on the (allegedly) empty toner at Brother models. Report printer empty toner, but is still available (as long as the terms iO [ie not pale] are, toner is splashing around!).
It could thus try (even if the "error": after inserting the new toner, the printer reports: toner empty)
1) Turn off power switch, open the front door.
2) GO-button on the device and turn on the power switch.
3) GO button keep pressed until TONER / DRUM / PAPER LEDs.
4) GO-button release.
5) GO key 2x (TONER / DRUM / PAPER LED) lights.
6) GO-button 6 times (standard toner).
Close 7) Front Cover
Alternatively:
On toner are left and right transparent caps (thus approved via the printer toner levels), covering with black tape. So you can pretend the printer that he still has toner (while splashing toner is ^^)
