The assembly is done quickly with minimal technical skills. There is a plastic holder in which is screwed at two points to the ceiling. There are no screws and plugs in the package, given the different ceiling materials but you should always pick up the material of his choice. Mounted in the holder is a short threaded rod. It is important that the rod is inserted before screwing on the ceiling. If the bracket is mounted to connect the cables. There are no enclosed luster terminal, possibly buy some or take over from the previous lamp.
The upper nut, the threaded rod is fixed on the holder, the second is the distance from the bulb top, the third nut is turned to the bulb to fix them to the ceiling. Take care during the mother is positioned over the lamp far enough up, otherwise the lamp does not rest on the ceiling and wobbles. Please also make sure that possible rests not on the cable pull switch, since this will otherwise be wedged and stiff.
Last screw nut, again check the alignment and correct if necessary, tighten and screw the blue cap. Beautifully here: the cap is threaded, thereby holds really firmly.
Not visible on the product image, so a photo attached: About the timber place a white sheet metal grid is fitted that the distance from the ceiling and wooden panel bridged hides all cables.
The lamp is switched normally through the light switch, the pull switch selects the operating mode. Again, a nice detail, the hole for the cable is protected with plastic, so it will not wear through the wood.
You can choose between pears, pears and LED only LED and both made.
Mind you this is respectively the last setting, even if you turn off the light at the light switch.
The child can thus fall asleep with LED light slumber, which you then turn off the light switch. Does one have to again go into the room again only the LED light on and the nightcap is not dazzled.
We have Philips LED bulbs installed (6 watts = 40 watts), it's almost a little too bright, we will switch to smaller bulbs.
Overall, a strong buy recommendation.