Haida quality

Haida metal filter holder for 100 series drop-in filter
(Supplied by Timetrends24)
The filter holder is made of metal and tired running in corresponding Haida adapter. On the front two filter slots are pre-assembled, a third rack in and can quickly means two screws are mounted. These trucks are made of plastic and fitted with a bracket that hold the 100mm filters. The original Haida filters are held securely (see below). From the use of a screw-in polarizing filter I see from because the handling will not be as easy on wird.Vignettierung 17-40mm WW I could not even notice. The design reminds me of the Lee-holder which is to my knowledge, made of plastic, but Haida is here considerably cheaper to buy.

Haida Optical Neutral 3 Neutral Density Filter Set 100 mm x 100 mm ND0.9 (8x) / ND1.8 (64x) / ND3.0 (1000x) - Incl. Haida filter bag
(My order here at Timetrends4 on Amazon).
The filters were delivered each individually in an overpack. Two filters were delivered in a nice bag from which can be difficult to remove the filter. The third filter was delivered in a plastic box with a microfibre cloth. On the back of the filter, an approximately 1 mm thick frame is glued of foam rubber. This frame seals the filter holder from the back and will probably prevent extraneous light. The color neutrality is good in my opinion. A slight color cast can be removed in the EBV. (My B + W filter is as much farbstichiger). There are no streaks o. Ä. To recognize. The filters are made of glass, about 1 mm thick and therefore prone to breakage.
This breakage is significantly lower in the supplied Haida filter bag. It can be six filters, also accommodate the size of 100 * 150mm. The bag is provided with two tabs. This allows the bag to your belt or even attach to your camera bag.

Haida Pro II MC Optical 150 mm x 100 mm GND Soft Edge Gradient Filter 0.9 (8x) (12.5%)
(Supplied by Timetrends24).
The filter has a nice smooth curve. A slight color cast can be removed in the EBV. The filter is made of glass and highly remunerated. This is in my opinion a major flaw. The compensation is a highly reflective surface on both sides, as it is known from sunglasses. This is reflected in the front lens or in the other filters. Remedy brings seemingly wrong arrangement of the filter. I have been setting the course filter as a first filter in front of the front lens and a neutral density filter, which results in wonderful reflections. Conversely, the Grauverlauffilter used as second filter, resulting in fewer reflections. I must, however, in more detail, and to try out in the sunshine.