Have after much studying I decided for this Deltacrypt module, which should be used in satellite tuner in the newly purchased SONY KDL-65HX925. Since I do not own a computer further with a COM interface, the choice fell on the USB - Unicam Programmer. Programming is as fast of hand as with the COM variant. First let infect the programmer to an available USB port and install the device driver software (goes by itself). Then push the Unicam module on the long board of the programmer and the toggle switch (red LED lit). Unicamloader 1.1 (downloaded from the unicam2.to side) open and correct COM port and select Cam Image (Sparta 5:34) Select. When the message Wait for modules reset ... "the short plug part appears Push on the module and the programming will start automatically. If you do not know which COM port the programmer is assigned by the system, then simply open the Device Manager and under Ports" COM & LPT look. Bits per second can be maintained at 9600.
Then the module in SONY KDL-65HX925 is installed V13 card with SKY. All SKY and ORF programs are properly received, fast switching, Low SKY mission also possible. Therefore Completely satisfied 5 stars.