However, the connectors are very cheap on the board on one side with a
Glueline fixed and not as usual screwed to the rear panel or anchored.
This results when properly deliberate snap a Toslinksteckers to bending of the socket on the
Board and to the demolition of these adhesive seam. Some toslink metal sit innately
something solid and must be engaged with a little more effort. The withstand this
No device! Even with Toslinkkabeln with plastic plugs quickly the socket connector is pushed into the housing here without taking the necessary precautions. Then you can actually send back only the equipment. Or you can dispense with the guarantee, the device opens to the empty space between the bushings and the inner housing top z.Bsp. to press with Styrodur so that the jacks have no more room to move. But that is only connected to what for hobbyists and also with a little effort, since in this case the board is bent by the now created pressure on the sockets something down and the connectors then have to be centered again with much fumbling in attaching the case back in this very troublesome , My unit and I have this procedure survived with some emotional hot flashes. But I would definitely buy this device a second time.