SAVFY sj4000 firmware

Categories


  • Cost-arm extension  

    SAVFY® 3 in 1 Selfie Stick Selfie rod Self-portrait monopod arm extension Handheld Tripod Self-Portrait Set Handheld Aluminum Selfie Stick + Smartphone Holder + Bluetooth self-timer remote control for all devices with iOS and Android as iPhone 6 Plus / 6 / 5s / 5c / 5 / 4s / 4, Sumsung Note 3/2 / S4 / S3, Blackberry, HTC, Sony, Nokia, LG - long pole (31-94cm) Black (Electronics)
    I have now tested a few days the Selfie stick and mainly used in quiet situations and have not been disappointed. Group photos go now easily from the hand, because where once a photographed and so was not in the picture, this may now extend the arm e
  • After a long search here the perfect and most of all affordable alternative for GoPro! incl. WIFI!  

    Kitvision Edge HD30W Waterproof Full HD 1080p Waterproof Sports Camera Action Camera with Wi-Fi / WLAN, extensive Halterungsset and waterproof housing - Black (Electronics)
    Property me already purchased here at Amazon a Savfy SJ4000 for 70 Euro. At first I was happy with the camera, but they have returned to about 1 week. This was due to the poor quality of workmanship and noise during movies. The video quality I was al
  • Qumox SJ4000 Black  

    QUMOX SJ4000 CAMERA (equipment)
    I have the camera here you bought from Amazon on Memory, sitting according to the masthead in Hong Kong, so I was a little skeptical. Wrongly. The camera was quickly sent via Royal Mail, the shipment was delivered exactly 6 days later and indeed even
  • Original SJ4000 ?? FW update went without problems, at least! UPDATE ...  

    SAVFY® SJ4000 Sport Camera Waterproof Helmet Camera Action Sports Cam muti-function Mini Sport Outdoor Waterproof Camera Cam DV Full HD 1080p video camera with 21 accessories for sports camera (incl. 2 batteries) (Electronics)
    Have the us buy takes place a few days for a martial arts event to me the camera. Did not want to spend 300-500 euros for a GoPro or Sony. The first shots look very promising. In bright light with absolute sharpness. Have no comparison to a GoPro, bu
  • Firmware limited and unstable  

    SHUTTLE NAS Omninas KD20 Barebone PLX 7821 / 750MHz (Personal Computers)
    Basically, I'm really happy with the hardware. The transmission rate is at a GB-LAN and an internal WD Red 3TB with about 42 MB / s in order (even if in theory would be possible). However, the major drawback to this device is the firmware from Shuttl
  • Good hardware bad firmware  

    Philips SA4VBE04RN / 12 GoGear Vibe MP4 Player 4GB (4.6 cm (1.8 inch) color screen, Philips Songbird, Like Music) red / black (Electronics)
    I bought the Philips GoGear Vibe MP4 player through Amazon and want to write about my experiences with it. The me present equipment variant was the player SA4VBE04RN / 12th Installation: 1. Installing the driver When connecting the device to the PC t
  • High temperature, loud buzzing noise, no firmware update possible  

    TrekStor DataStation maxi light 3TB external hard drive 8.9 cm (3.5 inches) USB 3.0 Black (Personal Computers)
    The first hard drive I got was broken, which is not just increased confidence in this type. The free replacement from Amazon then works, but has agreed to quirks: -It Was appointed the TrekStor DataStation because based on previous reviews as compare
  • Perfect for the intended purpose - review for new firmware and new app version  

    Jawbone Bluetooth UP24 Activity / Sleep Tracker Bracelet (Size L) orange for Apple iOS and Android (Wireless Phone Accessory)
    I carry the UP24 a week now and have played in the last 2 days to update the new firmware and the new app, here's my report. *** Preliminary *** First, you should ask yourself what you really expect from a gadget on your wrist. I would have no device
  • So-so, low-cost solution with unripened Firmware  

    WD My Cloud Mirror Personal Cloud Storage 8TB (8.9 cm (3.5 inch), dual-drive NAS) (Accessories)
    Unfortunately predominate with 12: 2, the negative anomalies :-( Negatives: 1) Unfortunately, you can not say for sure whether the installed hard drives have the Idle3 timer problem, neither Google nor WD itself bring the information if and at what p
  • Second microSD card In GoPro HD3 Black with Firmware Update deffekt  

    SanDisk SDSDQUA-064G-U46A Mobile Ultra microSDXC 64GB UHS-I Class 10 Memory Card + SD Card Adapter + Memory Zone Android app up to 30MB / sec. Read (Personal Computers)
    This is now the second card I've used in my GoPro HD3 Black. The first card has a 5 times will use up the ghost and "SD ERROR" is displayed. A format was possible neither with the camera nor by any Pc + adapter. Amazon has taken exemplary t
  • There is a lot on offer. Update: Firmware 2.0  

    Olympus E-M1 OM-D Systemkamera (16 Megapixel, 7,6 cm (3 Zoll) TFT LCD-Display, Full HD, HDR, 5-Achsen Bildstabilisator) inkl. M.Zuiko Digital ED 12-40mm Top Pro Objekitv Kit schwarz (Elektronik)
    See video with Amazon.com The Olympus Om D e-M1 in 10 minutes video explanation adequate in my opinion not feasible. Therefore, I use the video to the camera to show only briefly and to give instructions to a few settings. In the comments section you
  • Perform firmware update for large fast CF!  

    Transcend All-in-1 multi-card reader (SDHC / SDXC / MSXC, USB 3.0) Black (Personal Computers)
    The card reader is for me with respect to handling and speed Ok. Hing far on various PCs and my Synology NAS and has almost always worked well. BUT: He has problems with fast and large CF cards. (Eg Transcend Ultimate 600x 32GB CompactFlash (CF)). Th
  • Great monitor when one has V2 firmware.  

    BenQ XL2411Z 61 cm (24 inches) 3D LED Monitor (HDMI, DVI-DL, VGA, 1ms response time) black / red (Accessories)
    Unfortunately I got from Amazon yet to BenQ XL2411Z with firmware V1 :( However, after a little googling found a simple guide on how to update the firmware from V1 to V2 even without extra Hardware. Just open and use the instructions [...], where all
  • Good with new firmware V2_20131209  

    BenQ XL2720Z 68.6 cm (27 inch) LED monitor (DVI-DL, 2 x HDMI including HDCP, 1 x USB up, 3 x USB down, NVIDIA 3D Vision 2-ready. 16:. 9 Full HD) black / red (Accessories)
    The V2 is now used for most shippers standard! For these owners, especially the setting instructions in this review are of interest. HISTORY The new technology BenQ Blur Reduction was to buy for me the main reason to monitor and BenQ XL2411T my previ
  • With matching firmware update also SDHC cards  

    Hama Card Reader Writer 19in1, USB 2.0 card reader (optional)
    I have the card reader now quite a few years in use. Now, however, I wanted to read SDHC cards and these are not recognized by the now but somewhat aged equipment. However, I came across a few postings, describing the one of 1000 in-1 19-in-1 makes i
  • Quite OK but really well only with (foreign) firmware of devices with the same chipset  

    Typhoon TP005 Game Cinema Media Recording Box for digital / analog AAC (Mic-In, USB 2.0, Full HD) (Accessories)
    I am not a gamer and have the part rather from a technical curiosity and because my kids wanted to occasionally show their Xbox360 game trains concerned. Also lured me the opportunity, in addition sometimes to digitize analog video signals via compos
  • With proper firmware function properly  

    AVM FRITZ! Box 7390 Wireless Router (VDSL / ADSL, 300 Mbit / s, DECT base station, Media Server) (Personal Computers)
    My Fritzbox 7390 I have not bought from Amazon, but would like to tell here in spite of all my experiences. On the Internet you read of various problems which the box. Despite all this, I ordered it. During installation, there was, as you'd expect fr
  • Samsung's SSD Series 840 EVO - Firmware Bug reduces read speed  

    Samsung MZ-7TE1T0BW Series 840 EVO Basic internal SSD hard disk 1TB (6.3 cm (2.5 inches) (1GB cache, SATA III) metallic silver (Personal Computers)
    End August 2014 I bought my Samsung SSD 840 EVO 1 TB and put into operation. After just six weeks Useful life is the reading speed of approximately 525 MB / sec to 80 MB / sec and thus decreased more slowly than normal hard drives. Files are read mor
  • After firmware update by manufacturer Samsung defective  

    Samsung Basic MZ-7KE256BW 850 Pro SSD 256GB internal (6.3 cm (2.5 inches), SATA III) Black (Personal Computers)
    After a firmware update the SSD is no longer bootable / is no longer recognized by the system. Apparently I'm not alone - have several identical messages found. Thought I buy as a branded product. A good brand product in my opinion is one of the prod
  • Works flawlessly with TZ10 Firmware 1.1  

    mumbi Premium Replacement Battery for Panasonic Lumix DMC-TZ6 / TZ8 / TZ10 / TZ18 / TZ22 / ZX3 (accessory)
    The title of the review says it all: The battery works in the TZ10 with Firmware 1.0 and after firmware update of the camera is now available with firmware 1.1