Positive is the chic exterior, very flat and with the proud depth incl. Cable of almost 38cm it fits in barely a shelf or on a sideboard, which is actually to assess negative again.
The IP7250 is the Canon Pixma series my fourth printer and will be my last. Was I ever so confident about the quality of my IP4000, IP4200, IP4500, that I recommended Canon Pixmas many friends, so I'll probably dispense with this IP7250 to the purchase of the first Tintennachfüllsets, because it is not worth!
Why: The handling has become very deteriorated by the lack of cut-sheet feeder and the complicated CD label printing process. When you switch on the printer This requires felt but not yet empirically tested with a stopwatch often up to a minute for self-test (the printhead carriage travels back and forth several times, the glands are tested) until he signaled pressure Breitschaft. Turning off the printer takes a similar amount of time to complete, because once again self-test can be started. Why does an inkjet printer has to press the Ausschaltbuttons test yet forever even if he repeated this when re turning anyway? If the printer is not for a few minutes in standby mode in use, it will automatically start rattling loudly self-tests. In addition, frequent communication errors occur when printing multi-page documents, which has half printed pages of paper or DVD Label result.
Of course, I first suspected to have bought a defective device. Luckily I was able to exchange my first IP7250 with a new appliance. But unfortunately shows the replacement device exactly the same loud rattling symptoms for which I only have two explanations: either I have had the great misfortune equal to get two defective printer from a "Monday-Charge" or the self-test when switching on and off of the device are setting new standards with Canon printers so that more over-priced ink cartridges are sold? ...