The assembly of this film is very simple and runs quickly and smoothly. It comes with a plastic rail that is sufficiently wide to aufzustreichen the film when applied across the board. The film is brought simple - as with any protector assembly - partially and sweeps with the plastic rail, the film easily from the carrier film to the glass. The track itself is made of a soft material, therefore does not leave any scratches on the film. In my case originated in this way no air pockets. The film stuck immediately perfect - rarely seen such a perfect result had. At the edge I had (with a strip of adhesive tape) to remove only a single speck of dust by gently again to lift the foil. For this purpose also served scotch tape. The inevitably caused by the anti-reflection film graininess is not as bad as in other films. But this film does not fit perfectly. Bring to the film exactly centered on the cutout for the front camera is not rundrum symmetrical, but that does not particularly bother and does not affect the functionality. Sure, the film could be also a good millimeters wider or higher, they can but also a larger part of the display uncovered, as the product of a competitor. In addition, this film has an additional recess above the opening for the front camera. There I discovered only at a second glance at my Mediapad a sensor for which this second opening seems to be.
Conclusion: Highlight is the simple installation using the supplied installation devices in. The associated with the high quality anti-reflective coating deterioration of the display quality is comparatively low. Those who place more emphasis on fit, possibly weighted differently. In letzgenannter property is namely still potential for improvement.