The vase consists of lamellae 10, a sub-floor and a lid; all made of white plastic. Each blade has 2 pins and below the upper area (almost at the narrowest point) on the one hand a rectangular pin and click on the other side at the top Berich a rectangular Klicköse for the click pin of the next lamella. The vase is assembled in 5 minutes: in the upper part by clicking in Zapfe in eye, below the ground also by one-click. The distance between the blades is in the range from below until it clicks cones in narrowing the field, relatively well. Of the click points up to the upper edge there are no spacers. Since the fins and click elements tolerances have and therefore are not entirely identical, the distances are different at the top of the opening between the slats, on my vase from about 1 mm to about 6 mm. To make the vase to another location, they can be put in the upper restricted area with your hands pushing, lifting or without cover on 2 slats with your fingers. In any case, you have then what total Wobbly in hand. I have the vase will not be returned, because I would have damaged the clicking elements in disassembling. I would no longer buy the vase for a practical purpose. I will also buy a more solid laundry collector. Unfortunately.