Noble packaging for the Raspberry Pi (Model B)
Exclusive High Quality Designer Aluminum Housing Case for Raspberry Pi + PLUS and Pi Model B 2 (the latest version 2015) (Black) (Personal Computers) 4
The housing offered here is probably the most noble and most stable, that you can get for the Raspberry Pi currently. The delivery took place quickly and in a stable neutral box. Visually, the black case an eye-catcher and absolutely Living Tough. All parts are very precise fit. The cutout for the USB ports could be larger but, if you keep a track, then also a Pi with not 100% accurate connectors facing could assemble easily. For installation you need a large and small Phillips screwdriver, and two small flat-nose pliers or two small Allen key (size 5.5?) An assembly instruction is not supplied. It also comes on himself. Here are my proposed assembly sequence: 1. Unscrew the side panel SD-card side, (possibly page 2 - USB) 2. Loosen the screws for spacer bolts on underside of housing 3. Loosen the nuts of the distance bolts 4. Insert distance bolts from below into the Pi board and fix it with nut from above 5. Insert Pi with the spacer bolts screwed into the housing Screw 6 board with the spacer bolts with the screws from the outside in the housing 7. side part (s) with screws. For about EUR 15, - not a bargain is the case, however, a thermal coupling of the processor to the case does not take place, so for me are statements about better cooling effect compared to plastic casings not quite comprehensible.