Plugging, configure in 1 minute - that's it!

Small guide to setting up as a repeater using the own Android smartphones
(1) The router / repeater plug it in and wait 30 seconds
(2) In the smartphone to call the wireless settings and the network "Wireless-N (Open Network)" Connect (the phone is automatically assigned an IP address)
(3) In the browser of Android smartphones to call the address "192.168.10.253", then the Router / Repeaters menu
(4) There login now with user and password ("admin", without the quotes!)
Click (5a) links above in the "repeater Wizzard", select from the list of displayed networks own (in the appropriate line on the "Select" button) and define the corresponding WLAN password
(5b) In the "SSID" its own name can the WLAN, which builds the Repater be given. Although this is for the operation not mandatory, I have used the same name as my WLAN with the suffix "R" (for repeaters).
(6) on "Save & Reboot" button and wait for the router / repeater restarts. IMPORTANT: After the restart not access more than the above IP address is possible because the device no longer acts as the "active network device".
(7) In order to test whether the repeater can now work properly you look at the free app "Wifi Analyzer" install. It should now show up as a second signal in the channel overview of the repeater. If this is NOT the case was misrepresented probably the WLAN password in point (5a). Then the router / repeater reset (small head on the side and hold for 10 seconds and at point (1) start again.

Other operating options of the device such as a wireless access point to a LAN socket (or similar in the rumpus room) are also set up simple via the web interface, only from point (5), the procedure varies according to its own selection minimal.