If you can not be swayed by the completely superfluous pictures of assembly instructions, the whole law is simple. In 30 minutes of television including hung installation of the cables -. TOP My own guide: 1. Hold the mounting plate with its own level against the wall and the 3 drill holes (2 on top, 1 bottom center) 2. Drill hole 10 and sink plugs in 3. Fix the mounting plate in the balance 4. at two hinges remove the pin on the top and fold out so you can mount the TV the hinges fine 5. Mount both hinges, then fold back and insert the pin again and secure 6. lead gray metal bar through both hinges and screw the plastic ends up left and right 7. Hang the TV with the hinges in the mounting plate Slide 8. Black metal pin to secure in the mounting plate along 9. Set to desired inclination (can be readjusted by the black plastic ends and then engage it again) 10. beer open and rejoice;)