Installation note: See also my set pictures !!! Important: cloth around the mounting length must necessarily be just mounted !!!! screw with Silikonunterlegscheibe before "flanging" screw for a better hold the distance between the end of the awning cloth and circular torsion bar must on both sides equal to left and right side about 1,5 cm measured from the cloth to white plastic, and the cloth is not important "just" that rolls up wrong! Center of the bar! Since 2 screws must be fitted! 2 holes are the round rotating rod available at this point! All holes are present but not in the awning fabric! Holes in the torsion bar are vorhanden- "not in the towel" Search by Stechahle preparting position of the hole while !! Then the strong attract no screws with the Silikonunterlegschrauben with a Phillips screwdriver!
Conclusion: We live in a rented apartment, so we were only allowed one to assemble "terminal awning" No holes may be drilled according to our landlord, the trend in the future in rental housing on the balcony to drill any holes will worsen further in my opinion! ! Therefore this awning is a nice alternative that I can fully recommend it! We have now tested the awning in continuous rain, it is rainproof to 100%! Our balcony has remained dry !!
At extremely high wind or storm there could be problems because-it's only a clamping awning!
So far, the awning has no problems with normal to slightly stronger wind!
