I want to briefly introduce my impressions after buying now 2 brackets here. I purchased this mount for a 50 inch and a 48 inch LED TV in. She's swing, tilt and telescopic, which makes it very universal. Thanks to the dual arms reduce the risk of lateral tipping of the TV as in cheaper brackets is not the case. The shipping was fast. The parts are packaged in a box in bags. There are several screws, washers, spacers and plugs. The anchors can safely throw in the trash and would rather bring ordinary. I live in an old building with crumbling walls. Nevertheless enter 4x 8x50 + 6x60 dowel screws in the top and 2x screws in the lower mounting row the whole neatly stop at the wall. Who wants to be sure takes 10ner dowels. To the inner slots need to use on the base plate, the double arm are removed. These use a combination wrench and Allen key. If the base plate attached to the wall, the double arm + washers are reattached it. Now, the recordings on the TV side attached and hang the whole of the top of the support plate. From the bottom from falling is prevented by screws. DONE! The pictures on TV I have attached that would easily show up the TV, but then stands vertically under its own weight. This can be achieved by additional 8ter washers or nuts 10ner from the hardware store. This is also referred to elsewhere long screws with me no problem. Who uses smaller screws can take other washers / nuts. Finally, I have easily solved the screws on the brackets, so you swivel the TV slightly to the side and can move forward / backward. The black painted parts only had the TV shots 2 small flaking, but no rust. I think the price is justified, because you get a stable mount with many adjustment possibilities. The shipping costs are due to its own weight also adequate.