To have tried just about anything for 10 years in the field of wireless, I can tell you that this repeater is perfect. This is the little brother of WN3000RP NETGEAR, if not his clone, the price and less. Easy administration through the RJ45 network jack or directly by its wi-fi network. By laziness, I do everything now by the WI-FI !!! this avoids plugging the damn network cable that was never on hand. In addition, a simple iPhone, Android or tablet is sufficient to enter the setup. I even venture to make firmware updates from day to wi-fi, but be careful anyway because of possible risk of brownouts radio or electrical flow. For correct positioning of the repeater, I recommend 2 things: 1- Use a small extension cord of 2 or 3 million to deport this module height preferably .Indeed positioning the electrical outlet, so close to the ground is an aberration in terms of reception and propagation of wireless signal. You can hide behind a vase, a lamp or a table. 2. Check and adjust your position for what is the best by monitoring the connection speed "Link rate" with your existing network in the Home menu / Repeater Status. The ideal theoretical speed is 300 Mbps for network N, but up to 250 will be fine. Then especially check the transfer rate with repeater in the "charge"; ie with a device connected to the repeater and surfing the net or downloading a file. The adaptation also applies to the 2 antennas that work "dipole": one by beaming office, the other ground plane. All positions are possible.