I'm not an expert but my next XL2720Z there is no doubt that the colors are richer and the uniformity of light is very good, I have no light leakage!
At the settings I somehow tampered with but eventually the original Standard configuration seems to me what is there better, DSC mode, sRGB and low blue light seems to really book for specific uses in entertainment this is the standard mode that seems suitable.
The AMD Catalyst driver is set to 10 bits per channel in color transmitted by the computer, regardless it work.
I have no defective pixel and I cross my fingers that it lasts, I read on the internet that QHD screens like this one but 27 "had many dead pixels due to their high density, large well m ' has taken to move to 32 ".
In the remote menu level and it's better than what is proposed XL2720Z, the remote has more buttons and touch keys on the screen edge seems less delusional.
Useful trick, the power button is really a button and not touch something as crappy on my XL2720Z is sometimes galley to light.
I looked at some pictures and movies, I was clean and fluid air.
I did some Heroes Of The Storm (game) and it is true that the persistence feels is super nice but for example the names of the players movements are hard to read. For the fastest games we must think of another screen.
In HOTS (beta 34659) my FPS counter is in the menus at 60FPS and it runs in the game at native resolution and 75FPS Vsynch ON, yes this is not normal because it should not exceed 60Hz m'enfin As it works.
At overdrive the fault is on high, there postions off and the premium; high is just right and not reverse ghost, off does nothing (obviously) but there's no big difference from high, premium reverse ghost lot (unusable).
The sound output is good enough, there is very little snow in the background (tested with senheizer HD205 headphones).
For those who intend to use the HDMI know that the literature indicates that the full resolution refresh rate will be reduced to 30Hz.
My personal experience is different:
- If I plug in directly to the HDMI output HDMI my Intel processor so I Haswel full qHD resolution with a 59Hz rate with 8 bits per pixel and by default I paneau little in the intel switch to 60Hz without noticeable effect .
- If I plug in HDMI via DVI> HDMI adapter while the video output is limited to Full HD 1080p 60Hz.
I just found that my vieu computer with an old Nvidia 7300LE connected to DVI cable with a DVI-D refused to offer me higher than 1080p at 60Hz which is not normal (my pc is big Display Port) . As it's a bit of gear m **** the 7300LE, difficult to attribute it to the screen.
In short it is expensive but for once it seems to Benq contends the shot so that the screen takes time.
Note that an SD card reader is integrated into the screen and 2 USB (+ the uplink with a special cable) and power are from below while the video jacks are on the right side with 2 USB taken V3 Additional .0.
Edit:
Let's say one week after the purchase I get up early the blow there is little noise and I realize that the screen whistles, typical of a DC / DC transformer with resonance frequency in the field of audible to human, So I take it 2 stars because the sound pressure is unbearable. Once we identified the brain is isolated and we hear it, too bad for me.
