The first disillusionment set but a when I realized that this is not about anti-reflective films (as in the description) is, but high-gloss films.
It may well be that I did not read the product description complete, the headline suggests to me here, however, that I should find matte antireflective films when unpacking. It is precisely this fact I wanted to also order!
Therefore I find the product description, at least judging from the product description in the title, somewhat misleading.
So be it, the film was still applied.
When taking measurements reveals that the film is indeed fit, but there are all around the edge but clearly visible gaps of about 1-1.5 mm. Altogether too small to cover a mu to the entire display.
The application is running as usual, so best before even adapt, solve, hang up and pull off the carrier foil from the bottom slowly while at the same finger on the film centered slightly presses (or more leads) carrier foil on the top edge.
If the foil is applied without inclusions can be any bubbles with the squeegee out emphasize the edge.
However, I have found that the film, despite all care does not put entirely on the display.
Felt itself makes to the cutouts for the Dynamic Perspective cameras, where two of the film does not attract me at the edges even after long resting on the display glass and thus unsightly whitish border bubbles remain visible.
A Edit the doctor or the re-peeling and applying at the same place brought no improvement.
I have a total of three of the six films consumed in order to achieve an acceptable result, the problem with the edge bubbles
are each to varying degrees and at different points remained.
Although outside the visible display area remains aesthetically ugly anyway.
Whether the product quality or perhaps my inability attributable to now really, is anyone's guess.
The nachgeorderten me antireflection films of another manufacturer does not branch off this behavior in any case.
The same is true for various other films that I have been "glued" (eg Motorola Defy and Razr i, Nokia Lumia 535, 630, 830).
In daily use, it turns out that the film whether the high-gloss surface is being evil fingerprint-prone.
Even without frittenfett soaked hands forms, of course, depending on the intensity of use, sooner or later an unsightly filming.
Haptic other hand, there's nothing to complain about. The digitizer responds without delay on inputs and it also feels as usual.
The protective effect I could not test, the material acts, however robust and scratch resistant.
Visually there are no restrictions in the display quality.
My Conclusion:
For the cheap price sound quality is obtained with good facilities that do haptically and visually convincing in terms of display representation entirely.
There are departures for the slightly misleading product description and not quite edge bubbles free application (possibly subjective).
Less experienced film adhesives is the delivery of counter 6 films.
In my view, limited recommendable.
Summary:
+ Noble-looking packaging and good delivery
+ Price / performance ratio
o Non-unique product description (instead of glossy anti-reflective)
- Edge blistering even when several attempts / films
- Prone to fingerprints
Thanks for reading.
