The turn signals are processed clean and feel very valuable by the aluminum chassis. They really are extremely small and fall when switched off barely noticeable in the on all the more because the light output is impressive for such a small turn signals with just one LED.
The two-part via a connector wiring has already integrated a series resistor and is provided at the end with Japan connectors, which enables easy integration into the harness of the motorcycle. The attachment is a sufficiently long M8 threaded bolt. Unfortunately, the mounting design is not quite thought through: the connection plug in the cable is too large to fit through a 8mm recording, seems to have something noticed by the manufacturer, because the supplied nuts and washers are slotted and thus not over the entire length of the cable must be threaded. Recordings in motorcycle fairings, Blinker adapters and license plate holders are not slotted in the rule so that the cable must be cut and soldered again after assembly, or provided with a further connector. For a star deduction.
Since the indicators are as I said very small, it can in the assembly on short plate holders be necessary to use spacers to prevent them partially disappear behind the license plate. Up to 15mm can be used by mounting on a support with current material thickness, without causing difficulties with the attachment.
From four supplied blinkers unfortunately were with me two defective. I do not want to mention it, but draw it from no stars, because the sample is too small and something can happen from time to time.